Category: Uncategorized

Course Recommendations for MAE Graduate Students – Spring 2027

Unlike undergraduate degree programs, graduate degrees are flexible, so students can tailor the program to their goals and interests. An MS student can take courses of their choosing as long as they conform to the degree requirements found here.

The normal semester course load is 9 to 11 credits (3 courses), and graduate students are limited to 12 credits of 4000-level, including math, most often at 4000-level. Math the first semester is not required and not always a good thing as you are just starting your graduate career, adjusting to a new academic and cultural environment, and math courses can be challenging. Keep this in mind when selecting courses. The following list is lengthy. Some courses are listed in more than one category.

These are the 4000- and 5000-level ME courses on the Spring 2027 schedule, each with its Michigan Tech catalog description. The 5000-level descriptions come from the Graduate Course Descriptions catalog (effective Fall 2026). The 4000-level courses descriptions come from the Undergraduate Course Descriptions catalog for 2026–27. Section information includes instructor, meeting time, and location.

Summary:16 courses at the 4000 level and 16 at the 5000 level. For ME 4990 and ME 5990, only sections that can be used towards your graduate degree are listed with a topic title (the generic per-faculty “Special Topics” sections are left out).

Prerequisites Are Enforced in MAE

Many of the 4000-level and some 5000-level courses have required prerequisites. You have probably had the prerequisite for 4000-level, but our registration system does not know that. If you get a prerequisite error for a MAE course, submit the waiver request here. Waivers are processed in the order submitted, with those having the published prerequisite course first. Waivers are not intended to allow you into a course for which you are unprepared. Waivers are to override the registration system for similar courses. Course equivalency is determined by content, not course title.

Required Courses

ME 6000 – Graduate Seminar (2 credits required for on-campus MS, 1 may be substituted by co-op(s).

Presentations and seminars on issues related to mechanical engineering and engineering mechanics. It may include invited speakers from industry, government labs, and academia. It is strongly recommended that you take the seminar in your first semester. NOTE: Seminar courses in other departments cannot be used as a substitute for ME 6000 or for credit toward any MAE degree.

Responsible Conduct of Research (RCR)

All graduate students are required to complete Basic RCR and Advanced RCR. Basic RCR is most easily completed by attending the required Graduate Orientation on the date specified in your acceptance letter. Advanced RCR must be completed after you are here and by the end of your second semester, or you will not be permitted to register. There are options for completing Advanced RCR that you will learn after you arrive. More information can be found here.

Mathematics

The MS requires 3 credits of math. The credits must come from MA-department 4000 level or higher courses and be mathematical tools, such as differential equations, linear algebra, regression analysis, etc. It may not be a math appreciation course like History of Math. The only other course outside MA that can be counted is ME5800 Advanced Engineering Mathematics, offered in the summer.

On-Line Courses

Online sections of the courses offered with on-campus sections (+OL) are unavailable to on campus students. However, a student on CPT can take online courses. Courses offered online only are open to on-campus students as well.

ME 4170: Failure of Materials in Mechanics

3 credits · Offered: Spring · Prereq: ME 3400

Identifies the modes of mechanical failure that are essential to prediction and prevention of mechanical failure. Discusses theories of failure in detail. Treats the topic of fatigue failure extensively and brittle fracture, impact and buckling failures at some length.

  • Spring 2027: R01, Sain, T. MWF 3:00–3:50 pm, MEEM 402

ME 4250: Heating/Ventilation/Air Conditioning

3 credits · Offered: Spring · Prereq: ME 3201

This course introduces the principles of heating, ventilation, and air-conditioning (HVAC) related to buildings. The simultaneous application of thermodynamics, heat transfer, and fluid mechanics is essential to solving thermal comfort, air quality, and building heating and cooling load problems.

  • Spring 2027: R01, Dyreson, A. MWF 2:00–2:50 pm, MEEM 402

ME 4404: Mechanism Synthesis/Dynamic Modeling

3 credits · Offered: Spring · Prereq: ME 3400 or ME 2700

Students apply kinematic synthesis techniques in design and analysis of mechanical systems. They develop synthesis software to link to dynamic analysis packages such as ADAMS, I-DEAS, Unigraphics, etc. They investigate influences of process variation on system output and learn methods to minimize the variation influences.

Spring 2027: R01, Platz, R. MWF 11:00–11:50 am, MEEM 40

 ME 4450: Vehicle Dynamics

3 credits · Offered: Spring · Juniors/Seniors, College of Engineering · Prereq: ME 3400 or EE 3261

This course will develop the models and techniques needed to predict the performance of a road vehicle during drive off, braking, ride, and steering maneuvers. Topics to be covered include: acceleration and braking performance, power train architecture, vehicle handling, suspension modeling, tire models, and steering control. Matlab, Adams Car, and Amesim, will be used as computational tools.

  • Spring 2027: R01, DeClerck, J. MWF 1:00–1:50 pm, MEEM 406
  • Spring 2027: R02 (online), DeClerck, J.

ME 4701: Analytical and Experimental Modal Analysis

4 credits · Offered: Spring · Prereq: ME 4702

Combined experimental and analytical approach to mechanical vibration issues; characterization of the dynamic behavior of a structure in terms of its modal parameters; digital data acquisition and signal processing; experimental modal analysis procedures; parameter estimation for obtaining modal parameters; model validation and correlation with analytical models; structural dynamics modification.

  • Spring 2027: R01, Malladi, S. MWF 10:00–10:50 am, MEEM 403, plus labs L01–L03 on Tuesday

ME 4704: Acoustics and Noise Control

3 credits · Offered: Spring · Prereq: MA 2160

Analysis and solution of practical environmental noise problems. Fundamental concepts of sound generation and propagation, the unwanted effects of noise, assessment of sound quality, and source-path-receiver concepts in noise control. Lecture, measurement laboratory, and team project directed at solving a real noise problem under a client’s sponsorship.

  • Spring 2027: R01, Walber, C. MW 3:00–3:50 pm, MEEM 302, plus labs L01–L03 on Thursday

ME 4707: Autonomous Systems

3 credits · Offered: Fall, Spring · Robotics/ME majors · Prereq: ME 3750 or ME 4775 (may be concurrent) or EE 3160

The main concepts of autonomous systems will be introduced including motion control, navigation, and intelligent path planning and perception. This is a hands-on project based course. Students will have the opportunity to work with mobile robotics platforms. Having a foundational understanding of programming is recommended to make the most of this course.

  • Spring 2027: R01, Bae, J. MW 11:00–11:50 am, MEEM 120, plus labs L01–L03 on Thursday

_________________________________________________________________________

5000 Level

ME 5150: Advanced Mechanics of Materials

3 credits · Offered: Spring · College of Engineering · Prereq: ME 4901 (may be concurrent) or ENT 4950 (may be concurrent) or graduate status

A study of incorporating complexities into the classical theories of axial rods, torsion of circular and non-circular shafts, bending of beams and plates. Use of variational principles to obtain boundary value problems of aforementioned structural members.

  • Spring 2027: R01, Sain, T. TR 9:30–10:45 am, MEEM 402
  • Spring 2027: R02 (online), Sain, T.

ME 5220: Fuel Cell Technology

3 credits · Offered: Fall, Spring · Graduate, College of Engineering

Fuel cell basics, operation principles and advanced performance analysis. Emphasis on component materials and two-phase transport phenomena on proton exchange membrane fuel cells. Hydrogen production, transportation, and storage. Balance of plant and systems analysis.

  • Spring 2027: R01, Tajiri, K. MWF 11:00–11:50 am, MEEM 303, meeting with ME 4260

ME 5240: Computational Fluid Dynamics for Engineering

3 credits · Offered: Spring, odd years · Graduate, College of Engineering

Introduces finite-difference and finite-volume methods used in solving fluid dynamics and heat transfer problems. Covers numerical grid generation, turbulence modeling, and application to some selected problems.

  • Spring 2027: R01, Cai, C. TR 11:00 am–12:15 pm, MEEM 303
  • Spring 2027: R02 (online), Cai, C.

ME 5250: Internal Combustion Engines II

3 credits · Offered: Spring, odd years · Graduate, ME majors · Prereq: ME 4220 and ME 4201 (may be concurrent) or MEEM 5212 (may be concurrent)

Examination of current technology SI and diesel engines through the study of actuators, in-cylinder processes, cylinder pressure analysis, and cycle simulation. Additional topics of interest based on student input.

  • Spring 2027: R01, Naber, J. MWF 9:00–9:50 am, MEEM 303
  • Spring 2027: R02 (online), Naber, J.

ME 5255: Advanced Powertrain Instrumentation and Experimental Methods

3 credits · Offered: Spring · Seniors and above · Prereq: ME 4220 (may be concurrent)

Experimentation and testing of engines and propulsion systems through instruction and structured labs. Study and application of data acquisition systems. Investigation of transducers, calibration, signal conditioning, and noise for combustion, power, performance, efficiency, and emissions.

  • Spring 2027: R01, Naber, J. MW 11:00–11:50 am, MEEM 707, plus labs L01–L02
  • Spring 2027: R02 (online), Naber, J., plus online lab L03

ME 5290: Principles of Energy Conversion

3 credits · Offered: Fall, Spring · Graduate, College of Engineering

Introduces fundamentals of energy conversion and storage. Topics include fossil and nuclear fuels, thermodynamic power cycles, solar energy, photovoltaics, and energy storage. Students will apply energy economics and complete semester-long project.

  • Spring 2027: R01, Ra, Y. MWF 10:00–10:50 am, MEEM 303, meeting with ME 4200

ME 5295: Advanced Propulsion Systems for Hybrid Electric Vehicles

3 credits · Offered: Spring · Graduate, ME majors · Prereq: ME 4295

Hybrid electric vehicles (HEV) will be studied and simulated using advanced powertrain component analysis and modeling. An in-depth analysis and study of power flows, losses and energy usage are examined for isolated powertrain components and HEV configurations. Simulation tools will be developed and applied to specify powertrain and vehicle components and to develop control and calibration for a constrained optimization to vehicle technical specifications.

  • Spring 2027: R01, Robinette, D. MWF 10:00–10:50 am, MEEM 406
  • Spring 2027: R02 (online), Robinette, D.

ME 5315: Cyber Security of Automotive Systems I

3 credits · Offered: Spring · Graduate; EE/CS/Mechatronics/ME/CpE majors · Prereq: ME 5300 or EE 5455

Modern automotive control and communications systems from a cyber security perspective. Topics include: V2X communications, vehicle attack surfaces and vulnerabilities, in-vehicle networks, threat analysis and vulnerabilities, security mechanisms and architectures, security requirements analysis, hardware security modules, and standards.

  • Spring 2027: R01 (online), instructor TBA

ME 5655: Introduction to Lean Manufacturing

3 credits · Offered: Fall, Spring · Graduate, College of Engineering or Business. Introduces lean manufacturing tools, techniques, and practices. Topics include Muda, 5S, visual factory, VSM, theory of constraints, standardized work, pull system, SMED, TPM, and lean assessment. Additional case studies and manufacturing process simulation-based projects are also used for assessing and improving processes.

  • Spring 2027: R01, Tewari, R. MWF 12:00–12:50 pm, EERC 100, meeting with ME 4665
  • Spring 2027: R02 (online), Tewari, R.

ME 5656: Advanced Production Planning

3 credits · Offered: Spring · Graduate; ME/Engineering Mechanics majors

Covers fundamental production planning topics as capacity management, facility layout, process design and analysis, forecasting, inventory management, MRP, scheduling, and theory of constraints. Introduces basic lean concepts, lean production, and value stream mapping. Advanced topics include case studies and exploring the influence of machine learning, artificial intelligence, data analytics, and augmented/virtual reality fields on production planning.

  • Spring 2027: R01, Tewari, R. MWF 10:00–10:50 am, EERC 316, meeting with ME 4655

ME 5695: Additive Manufacturing

3 credits · Offered: Spring · Graduate, ME majors, College of Engineering

Background, principles, process chain, software aspects, post-processing, open-source tools, applications, and future directions of AM technologies are discussed. Advanced topics include process modeling and selection, DFAM, and opportunities and challenges of AM processes.

  • Spring 2027: R01, Sharma, B. MWF 11:00–11:50 am, MEEM 112, meeting with ME 4695

ME 5702: Engineering Vibrations

3 credits · Offered: Spring · ME/AE majors · Prereq: ME 4702 (may be concurrent) or graduate status

This course provides an in-depth exploration of vibrations, including single-degree-of-freedom systems, multiple-degree-of-freedom systems, distributed parameter systems, dynamic finite element modeling, numerical solutions, vibration isolation, absorption, optimal design for vibration reduction, analytical modal methods, transfer function methods, and damping models and analysis.

  • Spring 2027: R01, Malladi, S. MWF 9:00–9:50 am, MEEM 402

ME 5730: Dynamic System Simulation

3 credits · Offered: Spring · Graduate; ME / Vehicle Dynamics majors

Methods for simulating dynamic systems described by ordinary differential equations using numerical integration are developed including error quantification and simulation verification. MATLAB, Simulink and Simscape are used to illustrate key concepts.

  • Spring 2027: R01, DeMonte Gonzalez, T. MWF 12:00–12:50 pm, MEEM 402, meeting with ME 4730
  • Spring 2027: R02 (online), DeMonte Gonzalez, T.

ME 5990: Special Topics

Variable 1 to 4 credits

Study of selected subjects related to mechanical engineering or engineering mechanics.

  • Spring 2027: Sec 07, Electric Propulsion System (3 credits), Gan, T. MWF 1:00–1:50 pm, MEEM 302
  • Spring 2027: Sec 11, Turbulence (3 credits), Keshava Iyer, K. TR 9:30–10:45 am, MEEM 303
  • Spring 2027: Sec 50, Solar Energy Engineering (3 credits), Dyreson, A. MWF 9:00–9:50 am, Fisher 231, meeting with ME 4990 Sec 50
  • Spring 2027: Sec 57, Industrial Safety (1 credit), Ponta, F., Online

Application for Grader Positions in Fall 2025

If you are an MAE graduate student interested in being a grader in the fall 2025 semester, please complete the Google Application Form.

Note: To qualify for a grading position, you must:

  • Be a graduate student in the MAE department.
  • Be on campus, not on Co-op (CPT).
  • Have a background in mechanical engineering courses.
  • Be in good academic standing.

All grader positions are dependent on the availability of funds.