Category: Students

Nancy Barr, director of the MEEM Engineering Communications Program, presented a paper at IEEE’s Professional Communication Society (PCS) annual conference in Madison.

Her paper, titled “Starting from Scratch: Incorporating communication instruction in a revised mechanical engineering curriculum,” described the process used to develop and implement instruction in technical writing and presenting into the four-course mechanical engineering practice sequence.

The IEEE PCS society is dedicated to understanding and promoting effective communication in engineering, scientific and other technical environment.

The conference took place July 23-26, 2017.

“Fundamentals of Diesel Engines”—MEEM 5202 will be offered next week Wednesday through Friday as a one credit short course.

Course includes extensive laboratory components with a format that mixes traditional lecture and group discussion with hands-on experiments conducted in powertrain test-cells and through driving vehicles on the road. The course will be available to all Michigan Tech faculty/staff, graduate students, and undergraduate seniors.

Course description is included below.

“Fundamentals of Diesel Engines”—MEEM 5202 is a combination of lecture and hands-on activities. Options for transportation and lunch. Content; fundamentals of operation, performance metrics, thermochemistry, combustion, fuel injection and spray, air systems and turbocharging, EGR, energy balance, heat transfer, diesel engine simulation and advanced concepts and trends in diesel engines.

These courses are a great option for anyone looking to increase their understanding of vehicle systems, engines, or for students needing additional credits. The course will be delivered from the Michigan Tech Advanced Power Systems Research Center located near the Houghton County Airport. The course will be 2.5 days in duration, starting at 1 p.m. Wednesday, ending at 5 p.m. Friday of that same week. Transportation to and from campus may be provided each day. Lunch will be provided on Thursday and Friday.

Registration is now open through banweb.

Fundamentals of Diesel Engines, 7/12 through 7/14 CRN 52378.

There are no pre-requisites, but familiarity with thermodynamics and/or IC engine cycles will be helpful.

Contact Chris Morgan cjmorgan@mtu.edu for further details.

By MEEM, APS Labs.

Michigan Tech’s Department of Mechanical Engineering-Engineering Mechanics is hosting high school students from Houghton, Calumet and Lake Linden at a Robotics Machining Workshop during the week of June 19, 2017. The students are members of FIRST Robotics Competition teams.

Workshop developers are Marty Toth and Michael Goldsworthy (ME-EM). They will teach the students machining skills and safety practices. During the workshop, the students will machine all the components to construct a working Stirling Engine.

Building a competition robot is a complex undertaking requiring electro-mechanical design, computer modeling, creating machining prints, prototyping and lots of machining.

Michigan Tech connects with FIRST Robotics in many ways. Like many universities, Tech recruits FIRST Robotics high school students with scholarship opportunities. Tech faculty and staff volunteer with the teams during the six-week building season and during the off-season with special projects such as a robot that was created for this year’s Bridgefest Parade, which helped students develop skills for the next building season, which begins early in 2018.

FIRST Robotics

Michigan Tech’s Supermileage Systems Enterprise, part of Tech’s Advanced Motorsports, took first place for innovation solutions at SAE International’s Collegiate Design Supermileage Competition in Marshall, Michigan. The $1,000 award was sponsored by Top 1 Oil.

Michigan Tech’s team was one of 23 teams from the US and Canada who participated in the competition and one of 14 who passed the technical inspection. The Tech team placed 5th overall based their design report, presentation and fuel economy results, winning another $500 prize. They also won awards for best design execution and best overall team attitude, adding another $400 to their winnings.

But the hero of the day was Claire Sullivan, who was driving in her first Supermileage competition. Rick Berkey, Enterprise director, said: “I am giving our driver Claire Sullivan the ‘Coolest Driver under Pressure’ Award for her on-track performance.”

Berkey explained. “We were the last team on the track, and our final run was going very well. All this changed on lap 5 of 6, when the chain came off. We thought we were done and even stopped timing our laps. BUT, our driver Claire exited the vehicle (which is allowed) and got the chain back on without assistance.

“Here is where the excitement comes in,” Berkey continued. “In order to post a successful run and comply with the minimum and maximum speed constraints, we needed to complete the final lap somewhere between 3:50 and about 4:10 minutes—only a 20-second window to hit and about 2 minutes faster than our optimal lap times, all without any feedback on speed/time.

“As Claire accelerated, the engine cover blew off; it is normally secured by tape. Then, the cockpit cover blew off. It is not really designed for the driver to reinstall unassisted while sitting (or rather lying) in the car.

“To make matters worse, the cover bumped one of the kill switches in the process and shut the car off. Claire figured this out and reached up to turn the switch to the run position (all while strapped in a six-point safety harness).

“At this point we literally told Claire over the radio to ‘trust her gut.’ And she did. Her final lap was 3:57–not too fast, not too slow, but just right. The timing judges were impressed; we were in awe, and Claire was clearly our hero of the day.”

By Jenn Donovan.

The event took place June 8-9, 2017, at the Eaton Corporation in Marshall, Michigan.

Complete Results

by Rick Berkey

Event Summary:

• We were one of 23 registered teams – 6 from Canada and 17 from the US, including 3 from Michigan (other MI teams were Lawrence Tech and Univ. of Detroit – Mercy).
• Of the 23 registered teams, we were one of 14 who passed technical inspection.
• We earned a design score of 325 out of 450 possible, based on our written report and verbal presentation.
• After battling engine tuning and chain tensioning problems nearly all day, we worked through these issues and made two successful fuel economy runs of 443 and 535 mpg.

Results:

• We placed 5th overall based our design report, presentation, and fuel economy results ($500). Our design score helped us, as our fuel economy was only 7th highest.
• We earned 1st place Innovative Solutions Award, sponsored by Top 1 Oil ($1000 and plaque).
• We received the award for Best Design Execution, selected by the event organizers ($300 and plaque).
• We received the award for Best Overall Team Attitude ($100 and plaque), selected by the event organizers based on discussions with other teams in the pits. Our team spent a lot of time helping the Iowa State team who was having a lot of challenges trying to pass inspection. I’m most proud of this award, as it shows the true character of our team.
• I am giving our driver Claire Sullivan the ‘Coolest Driver under Pressure’ Award for her on-track performance below.

The 33rd annual Shell Eco-marathon Americas competition took place over the weekend, April 27-30 in Detroit, MI. This year’s event was the second season that Michigan Tech’s Supermileage Systems Enterprise team competed.  Shell Eco-marathon challenges student teams from around the world to design, build, test and drive ultra-energy-efficient vehicles. More than 100 teams from universities and high schools across the country and abroad came to the heart of the Motor City to compete on the track located on the city streets surrounding the Cobo Convention Center.

Read more at Pavlis Honors College, by Amy Karagiannakis.

A team of Michigan Tech and University of Michigan students placed 16th in the European Space Agency’s 9th Global Trajectory Optimization Competition. The online competition attracted 69 teams.

The competition challenge was: “It is the year 2060 and the commercial exploitation of Low Earth Orbits (LEOs) went well beyond the trillion of Euros market size. Following the unprecedented explosion of a Sun-synchronous satellite, the Kessler effect triggered further impacts, and the Sun-synchronous LEO environment was severely compromised.

Scientists from all main space agencies and private space companies isolated a set of 123 orbiting debris pieces that, if removed, would restore the possibility to operate in that precious orbital environment and prevent the Kessler effect from permanently compromising it. You are thus called to design a series of missions able to remove all critical debris pieces while minimizing the overall cumulative cost of such an endeavor. Each single mission cost (in EUR) will depend on how early the mission is submitted via this web-site (regardless of their actual launch epoch) and on the spacecraft initial mass.”

Michigan Tech’s team included Ossama Abdelkhalik (MEEM), four graduate students and one remote graduate student.

By Jenn Donovan.

Back by popular demand, three short courses will be offered this summer.

The courses are “Experimental Studies in Vehicle Dynamics,” “Fundamentals of Diesel Engines” and “Diesel Engine Control Systems.”

Courses include extensive laboratory components with a format that mixes traditional lecture and group discussion with hands-on experiments conducted in powertrain test-cells and through driving vehicles on the road. The courses will be available to all Michigan Tech graduate students and undergraduate seniors. Each course is one credit with a lab fee of $265. Course descriptions are included below.

Experimental Studies in Vehicle Dynamics: MEEM 5990 Section 50 — A combination of lecture and hands-on activities. Measure and understand vehicle size and CG (X-Y-Z), Determine optimum suspension setup for handling and performance. Model and measure real world vehicle acceleration for correlation and prediction of vehicle performance. See the effects of vehicle design on understeer and oversteer during limit handling.

Fundamentals of Diesel Engines: MEEM 5202 — A combination of lecture and hands-on activities. Options for transportation and lunch. Content; fundamentals of operation, performance metrics, thermochemistry, combustion, fuel injection and spray, air systems and turbocharging, EGR, energy balance, heat transfer, diesel engine simulation and advanced concepts and trends in diesel engines.

Diesel Engine Control Systems: MEEM 5204 — A combination of lecture and hands-on activities. Options for transportation and lunch. Content; review diesel operation, regulations, intro to engine control, diesel engine actuators, load control, Start of Injection, Rail Pressure, Turbo Control, EGR and Engine Out Emissions, aftertreatment, algorithm and calibration, OBD and controller communications.

These courses are a great option for anyone looking to increase their understanding of vehicle systems or engines, or for students needing additional credits.

All courses will be delivered from the Michigan Tech Advanced Power Systems Research Center located near the Houghton County Airport. The courses will be two-and-a-half days in duration, starting at 1 p.m. Wednesday and ending at 5 p.m. Friday of that same week. Transportation to and from campus may be provided each day. Lunch will be provided on Thursday and Friday.

Registration is now open through banweb:

• Experimental Studies in Vehicle Dynamics — 6/14/17-6/16/17 CRN 52391
• Fundamentals of Diesel Engines — 7/12/17 through 7/14/17 CRN 52378
• Diesel Engine Control Systems — 8/02/17 through 8/04/17 CRN 52379

Students are welcome to register for any or all three. There are no pre-requisites, but familiarity with vehicle dynamics, thermodynamics and/or IC engine cycles will be helpful.

Contact Chris Morgan for further details.

National Biomechanics Day is Thursday (April 6, 2017), a world-wide event for high-school teachers and students to advance the science and education of human biomechanics.

This year’s theme is, “Science Meets Fun on National Biomechanics Day.” The Kinesiology and Integrative Physiology (KIP) Department has collaborated with several departments across campus to invite local students to engage in fun, hands-on activities focused on biomechanics research.

In Mo Rastgaar’s (MEEM) HIROlab, students will place EMG sensors on their arms and move a robotic arm, as well as investigate an agile robotic prosthesis as it moves on a circular treadmill.

The event will begin at 9 a.m. Thursday with lab activities scheduled to begin at 9:10 a.m.

Read more at Tech Today, by Kinesiology and Integrative Physiology.