Category: Uncategorized

Registration Waivers and Signatures

It is best to check course pre-reqs, co-reqs, and restrictions before registration opens. This will allow you time to get appropriate signatures or make other plans for your schedule. You can check the course pre-reqs, co-reqs, and restrictions in the course descriptions listing by clicking the CRN (Course Registration Number) in the Schedule of Classes or by looking at the undergraduate course descriptions.

When registering, if you get an error, read the error. Many times the error is due to a time conflict or lack of a co-requisite course (i.e. MA2160 has a required Recitation and Lab). You can easily correct these errors by selecting a class at another time or adding the co-requisite course. If you still are unable to register, check the course pre-reqs, co-reqs, and restrictions to see if you may need a waiver.

Types of waivers (who to go to for approval):

  1. Grading Option/Credit Change Form
    • To take a class as Pass-Fail or Audit – not used for courses required to graduate (academic advisor and instructor)
    • To take a variable credit course, i.e. independent study (academic advisor and instructor)
  2. Credit Overload Permission Form
    • Students in good standing going over 18 credits (academic advisor)
    • Students on probation going over 16 credits (Student Affairs)
  3. Special Approval/Restriction Waiver Form
    • Major (department offering the course)
    • Level – Undergraduate or Graduate (department offering the course)
    • Special Approval
      • Instructor Approval – i.e. enterprise (instructor)
    • Prerequisite (instructor)
    • Corequisite (instructor)
    • Class Restriction to be Waived – Freshman, Sophomore, etc. (instructor)
  4. Time Conflict/Exam Conflict Permission Form (all instructors of conflicting courses)
  5. Full Section – (department offering the course)
    Check to see if another section would work if you rearranged your schedule. If not, go to department that offers the class for permission to enroll in a filled-section.

To obtain approval for a waiver:

  • Print “waiver form” from the Registrar’s Office website.
  • Complete the form and obtain signature approval from the course instructor or advisor for the department offering the course.
  • Bring completed, signed waivers to Student Services Center in the Admin Building.

Class Restriction on a UN course:
UN1015 and UN1025 are restricted to Freshman during initial registration. If you have AP or transfer credits that give you Sophomore status, you may be able to get a waiver to get into your correct UN classes. Go to the Student Service Center for a Class Restriction waiver. For students that did not take the appropriate UN course during the restricted year, class restrictions for the UN courses will be removed after the freshmen have scheduled (near the end of the 2nd week of the initial registration period).


Michigan Tech Language and Acronyms

As with every type of organization, Michigan Technological University (also known as “Tech,” “MTU,” and “Michigan Tech”) has a unique language and associated acronyms. The following are some definitions to help you learn Michigan Tech’s unique language.

  • Admin: Administration Building
  • audit: Taking a course without credit or grade
  • by ARR or by arrangement: Student is able to set the time of the class or appointment
  • co-curricular: A physical activity course, such as skiing or swimming
  • co-op: Professional activity supervised by an experienced professional in a job that places a high degree of responsibility on the student
  • co-req or Co-requisite: A course that MUST be taken in combination with the given course
  • CRN: Course Registration Number
  • degree audit: Form to fill out that lists all the classes to complete a given degree
  • DHH: Douglass Houghton Hall, the smallest residence hall
  • diff EQ: Differential equations course
  • EERC (pronounced “erk”or “E-E-R-C”): Electrical Energy Resources Center
  • Gates: The tennis center located near the SDC
  • GPA: Grade Point Average
  • GRE: Graduate Record Examination taken as a senior for acceptance to graduate school
  • HASS (pronounced “hass”): Humanities, Arts, and Social Sciences courses that count toward General Education requirements
  • Heights: Daniell Heights Apartments
  • internship: Summer job within engineering or another given field
  • late drop: Dropping a course after the drop date because of extenuating circumstances
  • McNair: Residence hall on the east end of campus
  • ME-EM (pronounced “meem” or “M-E-E-M”): R.L. Smith Mechanical Engineering–Engineering Mechanics Building
  • MUB: The Memorial Union Building
  • pass/fail: A grading option for assessing student performance in a course. Taking a course where the grade is not calculated into the GPA and credits may only be counted toward free elective credits in the degree requirements
  • PE or Professional Engineer: Licensed engineer that can offer his/her services to the public
  • pre-req or prerequisite: A course that MUST be taken prior to taking the given course
  • pre-req (C) or concurrent prerequisite: A prerequisite course that MAY be taken during the same semester (concurrently) as the course for which it is a prerequisite
  • SDC: Student Development Complex; athletic and recreational facility for use by all students
  • special topics course: A class format that allows for special title and focus, which may be different from section to section and from semester to semester
  • TBD or To Be Determined: Time offer of a class that will be scheduled around all registered students’
  • Union: Memorial Union Building
  • USG: Undergraduate Student Government
  • Wads: Wadsworth Hall, the largest residence hall
  • Walker: The Walker Arts and Humanities Center

First-Year Engineering Learning Center

Engineering Fundamentals has a First-Year Engineering Learning Center for students taking first-year ENG courses. If you have questions regarding your ENG course you can see your instructor or go to the First-Year Engineering Learning Center.

  • Room: 208 Dillman
  • Sunday – Thursday
  • 7-9pm
  • Staffed with Coaches

Dillman 208 is also open for students to do homework when there is not a class in the room.

If you need help with other classes, there are other learning centers available across campus.


Selecting a Major

If you are still deciding on a major, there are several items you may want to consider.

1. Meet with an academic advisor before you leave for campus for the summer.

Biomedical Mr. Mike Labeau (344 M&M, malabeau@mtu.edu))
BSE & Engineering Undecided Ms. Amy Monte & Dr. AJ Hamlin (112C Dillman, efadvise@mtu.edu)
Civil & Environmental Ms. Julie Ross (103 Dillman, jzross@mtu.edu)
Chemical Ms. Katie Torrey (202M Chem Sci, cmadvise@mtu.edu)
Computer Mr. Trever Hassell (131 EERC, tjhassel@mtu.edu)
Electrical Ms. Judy Donahue (131 EERC, eceadvise@mtu.edu)
Geological Ms. Kelly McLean (627 DOW, kelly@mtu.edu)
Materials Dr. Daniel Seguin (U-101 M&M, mseadvise@mtu.edu)
Mechanical Ms. Danise Jarvey & Mr. Ryan Towles (204AMEEM, dnjarvey@mtu.edu & 205A MEEM, ratowles@mtu.edu)

2. Take an engineering seminar course Fall 2014 to see if a particular major is right for you. The courses that are offered are listed below.

Biomed BE2100 – Tue 4-5
Chemical CM1000 – Tue 11-noon
Civil CE1000 – Mon 2-3
Environmental ENVE1501 – Tue 2-5
Geological GE1100 – Wed 4-5 & Sat 9-11
Sciences and Arts Undecided SA1000 – Tue & Th 10-11
Career Development Foundations UN2525 – Tue 4-5

3. Meet with Career Services for career guidance, discuss your MyPlan results, or gain career development strategies.

4. Check out the information about different engineering fields at the United States Bureau of Labor Statistics.


First-Year Engineering Learning Center

Engineering Fundamentals has a First-Year Engineering Learning Center for students taking first-year ENG courses. If you have questions regarding your ENG course you can see your instructor or go to the First-Year Engineering Learning Center.

  • Room: 208 Dillman
  • Sunday – Thursday
  • 7-9pm
  • Staffed with Coaches

Dillman 208 is also open for students to do homework when there is not a class in the room.

If you need help with other classes, there are other learning centers available across campus.


First-Year Engineering Learning Center

Engineering Fundamentals has a First-Year Engineering Learning Center for students taking first-year ENG courses. If you have questions regarding your ENG course you can see your instructor or go to the First-Year Engineering Learning Center.

  • Room: 208 Dillman
  • Sunday – Thursday
  • 7-9pm
  • Staffed with Teaching Assistants

Dillman 208 is also open for students to do homework when there is not a class in the room.

If you need help with other classes, there are other learning centers available across campus.


Preparing To Get A Job

It’s not too early to start preparing for a summer job; plan ahead for the 2012 Fall Career Fair. For details: www.career.mtu.edu/general/calendar.php:

  • Senior Meeting: Fisher 135, September 6, 6pm
  • Resume Blitz: MUB Commons, September 11, 12, 18, and 20, 11am-2pm
  • Industrial Panel Workshop: MUB Commons, September 13, 5:30pm
  • Career Development Conference: MUB Ballroom B & Alumni Lounge, September 19, 11am-2pm
  • Interview Skills Week: Admin Building 220, September 24-28, 9am-4pm, one-on-one mock interview
  • Why do and Internship or Coop? Fisher 139, September 25, 6pm
  • Fall Career Fair: SDC, October 2, noon – 6pm