Students Archives | Page 3 of 23 | College of Engineering Blog

MTU Blizzard Baja Team Succeeds at Baja SAE Competition

Published May 25, 2023

“It’s only up from here,” wrote Michigan Tech’s Blizzard Baja team after their success in Oshkosh. Follow the team on Instagram. They’re also on Twitter and Facebook.

Michigan Tech’s Blizzard Baja team took home an 8th place finish at the recent Baja SAE North American Competition in Oshkosh, Wisconsin in May.

In addition to a steering arm failure, the pit team also had to deal with mud build up during the race.

“Our 8th place finish was sealed by a 4th place finish in the final 4-hour Endurance event Sunday morning,” says team faculty advisor, Assistant Teaching Professor Kevin Johnson. “We were in 2nd place in the Endurance event for a long time until we had a steering arm failure on the car. The team quickly replaced the steering knuckle in the pits and got back on the track with a half hour remaining in the race. Regardless of this setback we were able to finish in 4th place.”

Earlier in the race, the team received a black flag, due to their car numbers not being visible due to mud buildup. The team had to enter the pit to clean them off, which set them back a bit, as well.

“This year we had a very strong team with outstanding participation,” adds Johnson. “The team had two major obstacles; a working reliable 4 wheel drive system and a new larger Kohler engine to replace the Briggs that had been used for many years previously.”

The team raced with their newest vehicle, the Matador.

Michigan Tech’s Blizzard Baja is one of 25 Enterprise teams, part of Michigan Tech’s award-winning Enterprise Program.

The Blizzard Baja team consists of numerous sub-teams. One of those, the 4×4 Senior Design team with members William Rivet and Alec Pominville, scrapped the 4×4 design from last year due to major issues. “They went through some iterations including a belt and a chain drive and finally ended up with a drive shaft, gearbox, and differentials design,” notes Johnson. “They put countless hours into design, manufacturing, and testing the last two semesters with help from a number of other students.”

This year, Michigan Tech served as host to Fei Baja, the SAE Baja team from Centro Universitário FEI, a university in São Bernardo do Campo, Brazil. “The team from Brazil contacted our team through social media asking if MTU Baja SAE would be willing to host them,” said Johnson. It turned out to be a fantastic experience for both teams.

MTU Blizzard Baja hosted friends from Brazil, team Fei Baja, during the competition.

“The best part of the competition was seeing all of our hard work pay off in the form of a top 10 finish,” said Gregory Jowett, a mechanical engineering student who serves as President of Michigan Tech’s Blizzard Baja SAE team.

“Whether someone was directly working on the vehicle, doing modeling or simulation, or making sure the trip ran smoothly, it’s incredibly rewarding to see everyone’s effort culminate in a successful experience like it did in Oshkosh,” he says.

“I am extremely proud of the entire team and feel they represented Michigan Tech very well.”
Prof. Kevin Johnson, Blizzard Baja faculty advisor

“Needing to modify our frame to pass technical inspections and breaking an a-arm during the endurance race were some of the larger setbacks we faced. In both cases, the team was able to efficiently work together to quickly solve both problems. Even after an early morning and 3.5 hours of racing, the team was able to replace the a-arm in the pits and get our driver back out on the track in less than 10 minutes.”

The success experienced by our team is a direct reflection of Blizzard Baja’s “work hard, play hard” culture,” adds Jowett. “We enjoy team bonding when we have free time, but when there are things to do, none of our members hesitate to selflessly step up and get things done.”

“Props to our pit crew!”
Gregory Jowett, Blizzard Baja president

As for joining the team, the Blizzard Baja enterprise conducts interviews for prospective new members twice per year. For more information, students can visit the website at baja.mtu.edu or email the team at baja@mtu.edu.

Learn more about the team online at https://baja.mtu.edu.

Michigan Tech ARES Team Competes in Tuscaloosa

Published May 25, 2023

By

The Michigan Tech ARES team is ready to roll.

A student engineering team from Michigan Tech is competing this week in the Robotic Mining Challenge, hosted by the University of Alabama in Tuscaloosa.

Michigan Tech team prepares ARES for competition. Go Huskies!

The event is designed to create solutions to problems faced on moon exploration missions, with 24 university teams from across the nation taking part.

Each team has spent the past year designing and building a robot that uses resources available on the lunar surface. During the competition, robots must autonomously navigate a lunar-simulated arena and excavate lunar soil, or regolith.

Michigan Tech’s robot, ARES, completed a 15 minute practice runs on Wednesday, May 24. ARES stands for Automated Regolith Excavation System. The name was selected after a brainstorm and voting, says Mechanical Engineering-Engineering Assistant Professor Paul van Susante, the team’s faculty advisor.

Ten of the Michigan Tech team’s 28 members are on site. That includes team lead Karson Linders (mechanical engineering and robotics engineering); Brian Geiger (mechanical engineering); Miranda Meyers (electrical engineering); Brenda Wilson (electrical engineering); Christi LeCaptain (mechanical engineering); Tanner Duncan (mechanical engineering); Collin Miller (mechanical engineering); Ian Giles (robotics engineering); Kyle Hintz (mechanical engineering); and Brendan McRoberts (mechanical engineering).

Many of the students are current or former members of MINE, the Multiplanetary INnovation Enterprise at Michigan Tech, which is also advised by Prof. van Susante. Several of the students recently graduated in April.

Michigan Tech’s ARES robot takes part in at test run at the 2023 Robotic Mining Challenge.

Throughout the week, teams will receive one 15-minute practice run and two competition runs. Practice runs will take place May 22-23 with the challenge beginning the afternoon of May 23 and continuing through May 26.

“We were overall pleased with our first competition run,” said van Susante. “Everything worked, but needed tweaking. “We have learned many things that we will improve today and all day tomorrow before our final competition run on Friday.”

Judges of the competition include industry professionals from Caterpillar, the Exolith Lab at the University of Central Florida and NASA’s Solar System Exploration Research Virtual Institute.

The Robotic Mining Challenge Award ceremony takes place Friday evening. The Michigan Tech team will travel back to Houghton the next day.

This contest is separate from the NASA Lunabotics Competition, hosted at Kennedy Space Center.

Thought-provoking, Intriguing and Sweet: Huskies Remember One of their Own

Published May 14, 2023

By

round disc-shaped chocolate with gear or wheel shape on top — The winning design, close-up!

Zachary stands on a stone, in front of a roaring waterfall — Zachary’s legacy of kindness and integrity lives on at Michigan Tech.

Winners were announced on April 19th, Zachary Podkul’s birthday.

This year, for the Third Annual Zachary Richard Podkul (ZRP) Memorial Scholarship Challenge, Mechanical Engineering Technology (MET) students honored their fellow Husky’s fondness for Michigan Tech, machine design, cooking—and of course, chocolate!

Six MET students in the Department of Manufacturing and Mechanical Engineering Technology rose to the challenge to design custom chocolates.

The students began their thought process on what to design late last year when the contest was announced at the end of fall semester.

They started out by creating a 3D CAD model of their design. Each chocolate could be no larger than 2”x2”x1”. Next, a 3D print of the model was created in the MMET Department’s Additive Manufacturing facility, using the Stratasys Fortus 400 MC, which uses Fused Deposition Modeling (FDM) to extrude plastic filament.

The students then each built a flask from poster board strips. The flask held their 3D printed patterns (the positive). Food-safe silicone was poured over the top to cast a silicone mold (the negative).

Once set, students removed their silicone mold from the flask, filled the new mold with melted chocolate, chilled it all to delicious perfection, then popped out their chocolate confections to enjoy—and also to be judged as part of the challenge.

MMET faculty members judged the entries by the following criteria:

3D CAD Model—Utilizes sketches fully constrained with parametric features
Originality—Unique and innovative design representative of Michigan Tech
Quality—Uniformity, strength and surface finish
Manufacturability—Ability for chocolate to be easily formed in mold
Detail—The chocolate conforms to the mold intended design

And the winner is…Michael Havens! He won a $1,000 scholarship!

Cathy and Michael stand arm in arm. — Congratulations to Michael Havens!

A plate with a single chocolate on a table, with the mold and 3d print. — Michael’s work: note his 3D printed pattern (black), and his silicon mold (blue).

Michael looks at large computer screen with picture of his wheel-shaped chocolate 3d design — Michael Havens presents his design to the judges.

Justin Hannah earned Second Place and a $500 scholarship.

Justin stands between Cathy and Richard holding his silicon mold. — Congratulations to Justin Hannah!

three chocolates on a white plate with Justin Hannah sign nearby — Justin’s wonderful designs.

David Watkins earned third place and a $250 scholarship.

David Watkins between Cathy and Richard, holding his 3rd place certificate — Congratulations to David Watkins!

Plate of chocolates, plus molds, 3d prints and cookie cutters on a table. — David’s winning work in both white and dark chocolate!

According to the Podkul’s, everyone was a winner!

The Podkul’s also gave gift certificates to the other three MET student who submitted entries: Beaumont Ujlaky, Teresa Hoving, and RJ Slater.

Cathy sits at a table and looks at the judges with her 3dDesign on a big screen behind her. — Teresa Hoving presents to the judges.

Five-sided chocolates on a plate plus a stuffed Husky dog toy and some cookies in cellophane and a blue silicon chocolate mold. — Teresa’s wonderful design

RJ sits at a table with Bryant in the background. Chocolates on a plate in the foreground. — RJ Slater presents his design to the judges.

Beaumont stands and holds his blue chocolate silicon mold with Cathy and Linda on either side — Beaumont Ujlaky, with Cathy Podkul and her sister, Linda Daleo

oval-shaped chocolate on a plate with a Keweenaw peninsula design on the top. — Just one of Beaumont’s chocolates. He designed several.

Nick holds a section of gray 3d print on a piece of plexiglass while Linda looks on. — Linda Daleo, Zachary’s aunt, was on hand for the event. Here she learns about the Stratasys Fortus 400 MC in the Michigan Tech’s AM Lab with MMET Professor of Practice Nick Hendrickson

Bow of cellophane wrapped frosted cookies with cookie cutters on a table. — Cathy kept the student-designed cookie cutters from the 2022 ZRP Memorial Challenge. She hired a professional baker to make delicious cookies using the cutters to share at the event. (Does that mean we’ll enjoy both cookies *and* chocolate at next year’s award ceremony??!!)

Zachary’s family supports the ZRP Design Challenge and an MET student scholarship through their endowment. It’s intended to ease the financial burden for students who share his MTU experience and for those who live with chronic health conditions. Zachary will always be remembered by his Michigan Tech family and alumni.

Want to join the Podkul family in supporting the Zachary Richard Podkul Engineering Memorial Scholarship? Learn more here.

This year, the Podkuls were able to meet all of the students in person who participated. “We were amazed at their designs and the level of detail,” said Cathy. “And we especially enjoyed hearing the thought process that went into their designs.”

The family is at home by an open closet door with board games on the shelf behind them. — Zachary with his mom, Cathy, and sister, Gabby

Zachary wears his cap and gown and has his arm around his father's shoulder. — Zach and his Dad

“Zachary’s best times were his college days here at Michigan Tech.”
Cathy Podkul

A table with Zachary's diploma, and other photos and mementos. — Loving memories of Zachary

During the Challenge award presentation, Cathy shared a bit more about her late son, Zachary, who was born eight weeks premature and fought for his health his entire life. He was diagnosed with Crohn’s disease at the young age of 10, and spent the next 15 years of his life battling the disease. He passed away in 2020.

“From the beginning Zachary had a mechanical mindset,” she said. “As a young boy, he was always inquisitive and curious about how things worked.”

With this passion for knowledge he enrolled in Michigan Tech and graduated in 2018 with a Bachelor of Science in Mechanical Engineering Technology.

Cathy describes Zachary as quiet, conservative, intelligent, original, sensitive, and witty, with a great sense of humor. At times, he was strong-willed and determined, too, which of course made him all the more lovable.

“We miss Zachary so much. It’s such a rewarding feeling to support this and to be able to present the awards on his birthday (April 19). My husband and I are grateful to Dr. Irwin, Bryant Weathers, and the MMET faculty and staff for their time and dedication to making these challenges successful for three years in a row.”

The group stands against a white-painted brick wall. — L to R: Richard Podkul, Bryant Weathers, Cathy Podkul, Linda Daleo, and John Irwin

The Podkuls plan to honor their late son Zachary with an MET Design Challenge every year. What will they come up with next? Details about the 2024 Challenge will be announced in about six months.

SWE Section Travels to SWE-Wisconsin Professional Day

Published May 1, 2023

By

Very large group of women at SWE Spring Forward 2023. — Image from SWE-Wisconsin Spring Forward 2023 Facebook page.

Last Saturday (April 15, 2023), MTU’s Society of Women Engineers (SWE) section attended the Annual SWE-Wisconsin Professional Day in Madison. We enjoyed visiting with the SWE-Wisconsin Professional Section, developing career skills and learning about engineering opportunities.

Gretchen Hein, SWE advisor, led an #IamRemarkable workshop, where participants learned how to advocate for themselves and others, and the importance of those skills in career development.
Second-year student Kathryn Krieger (environmental engineering) was honored as the 2023 GE-Healthcare Scholarship recipient. The scholarship committee was impressed with her involvement in SWE, Engineers without Borders and Delta Phi Epsilon.
The section received the Collegiate Section Achievement Award for establishing the SWE Section Endowed Scholarship.
We were also excited to see Andrea Falasco ’12 (B.S. Mechanical Engineering) and learn about her career path during the panel discussion on working for big versus small companies.

Nine section members attended:

Amanda West, junior (mechanical engineering):
“I enjoyed networking with the other SWE sections in the region. It was great to learn how other students handle their organization and use it to help improve our own.”
Talia Olson, junior (mechanical engineering):
“I enjoyed getting inspired by other women engineers and learning from their experiences. I learned how to brand myself and to own my strength in the workforce.”
Cassandra Borr, second-year (mechanical engineering):
“I found this conference to be very empowering, as we were able to see what other women in the industry have accomplished and how they achieved it.”
Carissa Best, first-year (mechanical engineering):
“I really enjoyed having the opportunity to hear the stories of confident women in STEM who were interested in empowering other women.”
Kathryn Krieger, second-year (environmental engineering):
“SWE has grown to be such an important part of my college career. I am constantly inspired by the women around me and grateful for the opportunities for both personal and professional growth.”
Catherine Huston, second-year (materials science and engineering):
“Learning to own who I am and how to recognize my accomplishments was empowering and an experience I will carry with me as I navigate my path in life.”
Tory Cantrell, first-year (mechanical engineering):
“The most important piece of advice that I will take away from this conference is how it is important to step outside of your comfort zone and evolve your leadership brand as you grow.”
Rixlie Fozilova, graduate student (environmental engineering):
“The Spring Forward SWE conference provided me with an amazing opportunity to network with fellow engineering students and professionals from a wide variety of companies and backgrounds.”
Lydia Minzey, first-year (environmental engineering):
“The conference empowered participants to believe in their abilities and reach out to achieve their full potential, even while being a minority in their field. I’m very grateful to have been able to attend and learn from the wise women present.”

SWE thanks the College of Engineering and engineering departments for supporting SWE throughout the year. We also thank the Undergraduate Student Government and our corporate sponsors, whose support made this travel possible.

By Gretchen Hein, Advisor, Society of Women Engineers.

Engineering Students Place High in the 2023 Graduate Research Colloquium

Published April 26, 2023

By

Researcher standing by her poster. — Tania Demonte Gonzalez

On behalf of the Graduate Student Government (GSG), we would like to express our heartfelt gratitude to all the participants, judges, sponsors and collaborators who made the 2023 Graduate Research Colloquium (GRC) a resounding success. Last week, we witnessed over 80 presentations from graduate students all across the campus, showcasing their outstanding research, creativity and academic excellence.

The GRC ended on a high note with the banquet and award ceremony on Thursday (March 30). We would like to extend our warmest congratulations to the GRC award winners for their exceptional work and dedication.

This year’s GRC winners are:

Poster Presentations

First Place: Tania Demonte Gonzalez (ME-EM)
Second Place: Roya Bagheri (ME-EM)
Third Place: Shreya Joshi (Physics)

Oral Presentations

First Place: Tania Demonte Gonzalez (ME-EM)
Second Place: Kyle Wehmanen (KIP)
Third Place: Jordan Ewing (GMES)

We would also like to thank our esteemed judges for their invaluable time, expertise and insightful feedback. Your participation has been crucial to the success of the GRC and the development of our graduate students.

Our sincere appreciation goes to our sponsors and collaborators — the College of Arts and Sciences, College of Computing, and College of Engineering, the Dean of Students Office, and the Graduate School — for their generous support and partnership. Your contributions have made it possible for us to provide a platform for our graduate students to showcase their research and build their professional networks.

Once again, we thank everyone who participated in and supported the GRC. Your engagement and enthusiasm have made this event a remarkable and memorable experience. We look forward to seeing you again at the next GRC.

By the Graduate Student Government.

Tania Demonte Gonza presented on “Nonlinear Model Predictive Control of a Wave Energy Converter.”

Roya Bagheri presented on “Electrical Stimulation for Maturation of Heart Muscle Cells.”

Jordan Ewing presented on “Remote Sensing using Machine Learning for Off-Road Mobility.”

2023 Graduate Research Colloquium: GLRC Student Award Winners

Congratulations to the Great Lakes Research Center (GLRC) Student Poster Award winners, in recognition of World Water Day, at the Graduate Student Government Graduate Research Colloquium last week:

First Place: Cassandra Reed-VanDam (CFRES)
Second Place: Michelle Bollini (CEGE)
Third Place: Mitch Kehne (BioSci)

By the Great Lakes Research Center.

Michelle Bollini presented on “Dynamic Bioaccumulation Model for a mining impacted Aquatic Ecosystem.”

Joint ROTC Commissioning Ceremony April 28, 2023

Published April 24, 2023

By

The Air Force and Army ROTC invite you to the Spring 2023 Commissioning Ceremony on Friday (April 28) from 7-9 p.m. at the Rozsa Center.

This semester we have 11 Air Force cadets and five Army cadets commissioning. Those commissioning are from the following programs:

We will also be streaming the ceremony if you prefer to watch it live on YouTube. The stream will go live 15 minutes prior to the ceremony.

By Air Force and Army ROTC.

Design Expo 2023: Awards Results!

Published April 21, 2023

By

Michigan Tech’s Design Expo 2023 was a huge success. Many thanks to our hardworking students—and the faculty advisors who generously and richly support them.

Hundreds of Michigan Tech students presented their innovative work last week at Michigan Tech’s 23rd annual Design Expo. Each project entails hands-on, experiential, discovery-based learning. Teams competed for cash awards totaling nearly $4,000.

“Design Expo gives students an opportunity to showcase their creativity and innovation,” says Nagesh Hatti, who oversees Enterprise.

“The students,” adds Leonard Bohmann, associate dean of the College of Engineering, “create new things, solve global problems and make lives better.”

Many of the Senior Design and Enterprise projects on display at Design Expo are supported by external industry sponsors, allowing students to gain valuable experience through direct exposure to real industrial problems.

In Senior Design, students explore and solve real industry challenges throughout their senior year—from ideation to realization. In the Enterprise Program, teams of first- through fourth-year students from a variety of disciplines operate much like real companies to develop products, services and solutions.

Project Sponsors Support Michigan Tech’s Educational Mission

“Project sponsors generously support our educational mission by providing invaluable project experiences, along with guidance and mentorship for our students,” adds Hatti. “Industry and academia working together as partners in higher education give our students a tremendous learning experience.”

Design Expo’s industry event sponsors make Design Expo, a large campus event, possible. “Their generous support often continues year after year,” says Hatti.

Thompson Surgical Instruments is Design Expo’s 2023 executive partner. ITC Holdings is the event’s directing partner for the 12th consecutive year, joined by fellow directing partner Aramco. And Plexus, OHM Advisors, Altec Inc. and Husky Innovate are collaborating partners.

This year, more than 100 student teams competed for awards. A panel of judges, made up of corporate representatives, community members, and Michigan Tech staff and faculty members, critiqued the projects. “Our esteemed judges give their time and talent to help make Design Expo a success,” adds Hatti.

The judges’ scoring was used to arrive at the awards. Visit the Design Expo website awards page to see the full list of award winning teams (and project videos, too).

The College of Engineering and the Enterprise Program are pleased to announce award winners, below. Congratulations and thanks to ALL teams for a very successful 2023 Design Expo!

ENTERPRISE

FIRST PLACE

123: Velovations

Led by: Ethan McKenzie and Michael Balentine, Mechanical Engineering

Advised by: Steve Lehmann, Biomedical Engineering

Sponsored by: Cleveland Cliffs, Tongy Senger Innovations, Milwaukee Tools

SECOND PLACE

106: Aerospace Enterprise

Led by: Seth Quayle, Mechanical Engineering and Kyle Bruursema, Electrical Engineering

Advised by: L. Brad King, Mechanical Engineering-Engineering Mechanics

Sponsored by: Air Force Research Laboratory (AFRL)

THIRD PLACE

104: Supermileage Systems

Led by: Olivia Zinser and Ben Klein, Electrical Engineering

Advised by: Rick Berkey, Manufacturing and Mechanical Engineering Technology

Sponsored by: GM, Aramco Americas, Oshkosh, Milwaukee Tool, A&D Technology – GIK, and Dana

HONORABLE MENTION

117: Innovative Global Solutions

Led by: Cynthia Wurtz, Mechanical Engineering and Riley Dickert, Physics

Advised by: Radheshyam Tewari, Mechanical Engineering-Engineering Mechanics and Nathan Manser, Geological and Mining Engineering

SENIOR DESIGN

FIRST PLACE

233: Social Engineering for High School Students

Team Members: Connor Langdon, Cybersecurity and Kayla Blunt, Computer Network and System Administration

Advised by: Tim Van Wagner and Victoria Walters, Applied Computing

SECOND PLACE

232: Shot Sleeve Re-design for Steel High Pressure Die Casting (HPDC)

Team Members: Ryan Cesario, Henry Summers, Victoria Berger, Caleb Minasian, and Katherine Jarvis, Materials Science and Engineering

Advised by: Paul Sanders and Walter Milligan, Materials Science and Engineering

Design Expo Innovation Awards (Based on Application)

FIRST PLACE

301: AAA [Affordable, Accessible, Authentic] Prosthesis
Advised by: Jon Herlivich, Chemical Engineering

The AAA team won a first place Design Expo Innovation Award. They are part of Michigan Tech’s Consumer Product Manufacturing Enterprise.

SECOND PLACE

203: Implantable Pulse Generator (IPG) and Lead
Advised by: Jingfeng Jiang and Chunxiu (Traci) Yu, Biomedical Engineering

THIRD PLACE

237: Utilizing Motor Oil to Rejuvenate RAP Materials
Advised by: Zhanping You, Civil, Environmental, and Geospatial Engineering

Engineering Students Interviewed About Design Expo 2023

Published April 20, 2023

By

Two students seating outside near the waterfront next to an off-road vehicle. — Mechanical engineering students in the Blizzard Baja Enterprise.

Michigan Technological University opens Design Expo to underclassmen

Briana Tucker and Nagesh Hatti (Enterprise) were quoted by WZMQ 19 News in coverage of Michigan Tech’s 2023 Design Expo, held Tuesday (April 18) at the Van Pelt and Opie Library and Memorial Union Building.

The Michigan Tech Baja Racing Team showcased their new car at the expo as well. This year they’ve been mandated to build a four-wheel car in order to compete and the team says they use the tools from class in every cylinder of their project.

Michigan Tech University holds 23rd annual Design Expo with wide project variety

Tucker, senior Ryan Peckham (electrical engineering) and first-year engineering student Andrew Brenner were interviewed for a WLUC TV6 broadcast segment, and first-year chemical engineering students Ethan LeGrave, Veronica North, and Bailey Wright were mentioned in the accompanying story.

The Wireless Communications Enterprise (WCE) team showcased several of their projects.

Feats of innovation

The Daily Mining Gazette also covered Expo, mentioning students Breanna Gorman and Cade Meyer.

Breanna Gorman, president of the Enterprise team and fourth-year electrical engineering major showcased a portable battery pack intended for military backpacks.

Cade Meyer, a fourth-year mechanical engineering student was part of the Velovations Enterprise team. They focus on bicycle design projects.

2023 Student Leadership Award Recipients Announced

Published April 18, 2023

By

Outstanding students, staff and alumni were honored Friday (April 14) during Michigan Tech’s 29th annual Student Leadership Awards Ceremony in the Memorial Union Building Ballroom. Thank you to everyone who joined us in celebrating their achievements!

Congratulations to all of the 2023 winners:

President’s Award for Leadership: Aerith Cruz
Provost’s Award for Scholarship: Emma Hayhurst, Biomedical Engineering
Dean of Students Award for Possibilities: Cayton Scholz, Electrical Engineering
Josephine and William Balconi Community Service Award: Jenna Messer
Exceptional Enthusiasm as Student Leader Award: Roya Bagheri, Mechanical Engineering-Engineering Mechanics
Exceptional Leadership in Student Governance Award: Cheyenne Scott, Biomedical Engineering
Student Employee of the Year: Enioluwa Wright
Rising Star of the Year: Riley Stichter
Outstanding Future Alumni: Kathleen Pakenas, Biomedical Engineering
Claire M. Donovan Award: Alexandra Marshall
Percy Julian Award: Giovanni Diaz, Biomedical Engineering
Award for Bravery and Kindness in Service to Others: Marco Marquez
Exceptional Program of the Year: Engineering Days, presented by Engineering Ambassadors and Society of Women Engineers
Student Organization Advisor of the Year: Alexandra Marshall
Exceptional Civic Engagement Award: Iranian Community
Most Improved Student Organization: Networking and Computing Student Association
Student Organization of the Year: American Institute of Chemical Engineers

Keynote speaker Jessica L. Thompson ’12 (BS, Biological Sciences) was also recognized as the recipient of the 2023 Outstanding Young Alumni Award.

More information about the awards and the recipients can be found on the Student Leadership Awards webpage. We also invite the campus community to save the date for the 30th annual Student Leadership Awards Ceremony, which will be held April 12, 2024, in the MUB Ballroom.

By Student Leadership and Involvement.

Department of GMES Shines at the 2023 Annual SME Conference and Expo in Denver

Published April 11, 2023

By

The 2023 Annual Society of Mining, Metallurgy, and Exploration (SME) Conference & Expo, held February 26–March 1 in Denver, Colorado, was a huge success for the Department of Geological and Mining Engineering and Sciences (GMES) at Michigan Tech. A large group of students and faculty representing the mining engineering and geological engineering programs attended the event, including eight BS students, five MS students, and a PhD student, along with two faculty members. They presented their research, received awards, and connected with alumni and industry.

The students in attendance were Michael Carly, Kolby Carpenter, Leanne Daanen, Jack Hawes, Jake Maxon, John Myaard, Jared Searl, Max Stange, Charles Addai, Ian Gannon, DharmaSai Eshwar Reddy Sirigiri, Enoch Nii-Okai, Emmanuel Wolubah, and Abid Danish.

Research Presentations

Associate Professor and Witte Family Endowed Faculty Fellow in Mining Engineering Snehamoy Chatterjee, delivered an oral presentation titled “Workers’ Compensation Data Analysis to Characterize Injury Severity in the Mining Industry,” based on his ongoing NIOSH-funded research.

Dr. Chatterjee’s MS student DharmaSai Eshwar Reddy Sirigiri gave an oral presentation titled “Modeling the Number of Days Lost from a Mining Accident by a Two-Stage Hierarchical Machine Learning Approach and MSHA Accident Data.”

Dr. Chatterjee’s PhD student Abid Danish presented a poster titled “Natural Language Processing and Machine Learning-based approach for clustering analysis of mining accident narratives.”

Recognitions

Dr. Nathan Manser, professor of practice in mining engineering and the chair for the Upper Peninsula Section of SME, accepted the Miners Give Back Award on behalf of the Upper Peninsula and Wisconsin SME local sections. This award is given annually and recognizes extraordinary achievements in community service and the advancement of the strategic objectives of SME during the past year by the local section membership. The focus of their work involved a collaboration with 4H to promote geosciences to middle-school-aged children in the region.

Alumni Connections

Michigan Tech alumni have always had strong representation within SME. Most notably, Marc LeVier (MTU BSMY ’71, MS ‘77) became the 2023 SME President on March 1 at the conclusion of SME Annual Conference & Expo.

As part of the week-long activities at SME, the GMES department hosted an alumni engagement event in the Hyatt Regency Downtown. About 66 guests attended the two-hour social event, including alumni from several MTU departments such as GMES and the Departments of Chemical Engineering, Materials Science and Engineering, and Civil, Environmental, and Geospatial Engineering.

The attendees came from classes in the mid-1980s through our most recent graduates, showcasing the vast network of connections alumni have, especially in the geoscience and minerals industries. A few members of the Industrial Advisory Board for Mining Engineering at MTU attended the event to rekindle connections with students and alumni. Our special thanks to Julie Marinucci for helping with the event organization! The event was a great opportunity for everyone to network and catch up with old friends. Overall, the alumni engagement event was a success, and plans for the next meeting in Phoenix are already underway. We are grateful to all the alumni who attended and look forward to seeing even more of them at future events.

Five people standing at a table in a large room. — GMES alumni event: (left to right) Luis Sierra (BSMG ‘05), Katie Robertson (BSMG ‘04), Trent Weatherwax (BSMG ‘03), John Uhrie (PhD ‘96), Theodosia Uhrie (BS STC ‘91). Photo credit: Julie Marinucci.

Six people standing at a table in a large room. — GMES alumni event: (left to right) Amol Paithankar (MSMG ’17; MS PhD ’20); Abid Danish (Mining Engineering PhD student); Bowen Li (Research Professor, Materials Science and Engineering); Charles Addai (Mining Engineering MS Student); Emmanuel Wolubah (Mining Engineering MS Student); and Enoch Nii-Okai (Mining Engineering MS Student). Photo credit: Julie Marinucci.

Four people standing near the wall in a large room. — GMES alumni event: (left to right) Richard Saccany (MTU BSMG ‘71), Don Larsen (MTU BSMY ‘79), Komar Kawatra (MTU Chemical Engineering), Mike Onsager (MTU BSEE ‘76). Photo credit: Julie Marinucci.

Four people standing in a large room. — Michael Carley (BSGE ‘23), Jake Maxon (BSMG ‘23), Nathan Manser (BSMG ‘01), and Kurt Doran (MTU ‘04). Photo credit: Julie Marinucci.

Fun

The MTU Student Chapter of SME participated in the Komatsu Student and Professor event at the conference, a dueling-piano themed event with over 300 attendees from schools worldwide.

Group of 15 people cheering and holding a Night on Bourbon Street from Michigan Tech sign. — The GMES group at the Komatsu student night event. Upper row, left to right: Kolby Carpenter, Charles Addai, Emmanuel Wolubah, Jack Hawes, Max Stange, Snehamoy Chatterjee, Nathan Manser, Dharmasai Eshwar Reddy S. Lower row, left to right: Abid Danish, John Myaard, Jake Maxon, Enoch Nii-Okai, Michael Carly, Ian Gannon, Leanne Daanen.

Other SME Activities

Director of MTU Mine Safety Program (hosted at GMES) Matt Portfleet, joined by mine safety trainers Marisa Roerig, Ron Gradowski, and Jake Drenth, also attended the SME conference. They had great opportunities to meet others within the mining industry and to exchange ideas. Michigan Tech Mine Safety also had the privilege of taking a two-hour private tour of the Colorado School of Mines “Edgar” mine. This is strictly an educational and research mine, which is operated by the school to provide students with hands-on experience and a location for research projects.

Says Matt Portfleet: “It was great to hear firsthand from our graduate student tour guides about the activities taking place there. Following this, we visited the Capitol Prize gold mine to experience some of the history of the area.”

The last day of our trip was again spent at the Colorado School of Mines, this time with Korky Vault, a 25-year veteran of mine safety training and specialist on cognitive impairments caused by sleep deprivation, substance abuse, and other influences. “This training provided us valuable knowledge and resources to share with our Mine safety trainees here in Michigan.”

Five people wearing hardhats and gear in a lighted mine shaft. — The MTU Mine Safety Program team explores the CSM’s “Edgar” mine.

Impact

We thank the Richard Saccany Mining Program Fund, the Robert Hendricks Mining Endowment Fund, and all our friends who contributed to the Mining and Material Processing Engineering Fund. Their contributions made it possible for our students to attend the SME conference and gain exposure to the latest advances in mining engineering research and practice, network with industry professionals, and explore future career paths.

As the department chair, I cannot overstate the importance of attending professional meetings for our students’ career development. The in-person attendance of the SME Conference & Expo was crucially important for building their professional networks and gaining valuable insights into the latest developments in the field. I believe that these experiences will contribute significantly to their success in their chosen careers.

One student attendee, John Myaard, shared: “I learned a lot and made some great connections with people in a diverse range of industries like mining, research, and mineral processing.”

Overall, the participation of our department in the 2023 SME Conference & Expo was a great success, and we look forward to participating in future events.

By Aleksey Smirnov, chair of GMES.

Category: Students

And the winner is…Michael Havens! He won a $1,000 scholarship!

Justin Hannah earned Second Place and a $500 scholarship.

David Watkins earned third place and a $250 scholarship.

According to the Podkul’s, everyone was a winner!

Poster Presentations

Oral Presentations

2023 Graduate Research Colloquium: GLRC Student Award Winners

Project Sponsors Support Michigan Tech’s Educational Mission

ENTERPRISE

SENIOR DESIGN

Design Expo Innovation Awards (Based on Application)

Michigan Technological University opens Design Expo to underclassmen

Michigan Tech University holds 23rd annual Design Expo with wide project variety

Feats of innovation

Research Presentations

Recognitions

Alumni Connections

Fun

Other SME Activities

Impact