Tag: Enterprise

What needs to be in my senior design abstract for Enterprise?

Go to the Enterprise Student Resources page, Project Template section, and download the Enterprise Project Summary (all other majors). If there are other ChE students on your team who are also using the project for senior design then you should be submitting the same abstract.

There is a nice description of what to include in each section in the template. Use that as your guide. In addition, we will be looking for the following in these sections:

Anticipated Outcomes of the Student Team

You need to include an economic analysis in this section as part of your project deliverables. This analysis should addresses economic factors from both customer and sponsor perspectives where possible. Give a brief description of your intended analysis and indicate the types of economic factors that will be considered.

Special Notes

Include a description of the realistic constraints in this section. At a minimum specifically address each of the following, using the same subheadings:

  • Engineering Codes and Standards. Codes are legally enforceable, such as ASME BPV, OSHA, 1990 Clean Air Act, RCRA, CERCLA (Superfund), etc. Standards are best practices, such as TEMA, ASTM, etc.
  • Economic Factors. Examples are process or product cost, market pricing, market opportunities, target markets, pricing, minimum selling price, availability of raw materials, etc.
  • Physical Limitations. Examples are size, weight, ergonomics, user interface, service life, ability to operate in a hazardous environment, etc.
  • Health and Safety Issues. Examples are laboratory practices, OSHA regulations, operator exposure to toxic chemicals, mechanical guarding, hot surfaces, fire and explosion situations, fail-safe mode, handling spills, etc.
  • Environmental Concerns. Examples are EPA regulations, identifying and handling air emissions and liquid/solid wastes, etc.
  • Additional realistic constraints should also be addressed where applicable. This may include: sustainability, manufacturability, constructability, ethical considerations, social ramification, political factors, legal issues, etc.

Michigan Tech to Provide

In this section include a description of your team make-up including team member names, their major, and their year in school.

How does doing Enterprise for senior design work?

If you are involved in Enterprise, you may use an Enterprise project as your capstone design project, pending departmental approval. Students choosing this option will take the following design classes senior year.

Fall Semester

CM 4855 Process Analysis and Design I. 3 credits. All ChE students take this course.

ENT 4950 Enterprise Project Work V Capstone. 2 credits. You will need departmental permission to enroll in this class. This class can count towards your technical or free electives.

Spring Semester

CM 4860 Process Analysis and Design II. 2 credits. All ChE students take this course.

ENT 4960 Enterprise Project Work VI Capstone. 2 credits. This course will substitute for CM 4861 Capstone Design Project (1 credit) on your online degree audit. The additional credit can count towards your technical or free electives.

How do I register for ENT 4950?

ENT 4950 and ENT 4960 are for students using Enterprise for their senior capstone design experience.  

You need permission to enroll in ENT 4950 and your project will need to be approved. We will allow you to enroll in ENT 4950 prior to having your project approved so that you can get your schedule and financial aid settled before the semester starts.

You must be senior design ready and currently enrolled in Enterprise in order to take ENT 4950.  You are senior design ready when you are able to enroll in CM 4855 Process Analysis and Design I. You’ll need to be enrolled in both CM 4855 and ENT 4950 next semester.

For permission to enroll in ENT 4950 go to the Enterprise Student Resources page, go to the Forms section, and complete the ENT 4950 Registration Form (ALL Majors).

This approval/registration process is paperless and uses a series of Google forms and system-generated emails sent from enterprisereg@mtu.edu. Watch for these emails and save them because they contain the link you need to submit your project for approval.

See related:  How do I get a project approved for senior design?

How do I have a project approved for senior design?

You will submit an abstract describing your project. To be approved the project must:

  • require the use of knowledge and skills acquired in your earlier engineering course work;
  • utilize appropriate engineering standards;
  • incorporate multiple realistic constraints;
  • and include economic considerations, which is typically an economic analysis discriminating between design options.

If your project is through Enterprise then you will submit your abstract using a link you received via email when enrolling in ENT 4950. The email was from enterprisereg@mtu.edu, titled “Part A Approved”.

Your project will be reviewed by the ABET committee chair, Dr. Caneba. You should review your abstract with Dr. Caneba before submitting it because revisions are often necessary. Abstracts are due by week 5 of the semester.

See related:  What needs to be in my senior design abstract for Enterprise? and How do I register for ENT 4950?

What do I need to know to plan out a polymer science and engineering minor?

Here is some additional scheduling information to help plan your minor. Be sure to check the schedule of classes on Banweb, since this can change from year to year.

Introduction to Polymers Course

Select one course below:

  • BE 4300 Polymeric Biomaterials is usually offered spring of odd years, such as Spring ’23, Spring ’25, etc.
  • CM/CH 4610 Introduction to Polymer Science is usually offered every fall.
  • MSE 4110 Introduction to Polymer Engineering is usually offered every fall.

Chemistry or Engineering Courses

Check with the department offering the course for the expected planned schedule.

Elective Courses

Select remaining credits below:

  • BE 3300 Biomechanics I or MEEM 2150 Mechanics of Materials is usually offered every year.
  • BE 4335 Smart Polymers is usually offered fall of odd years, such as Fall ’21, Fall ’23, etc.
  • CH/CM 4620 Polymer Chemistry is usually offered every spring.
  • CH 4710 Biomolecular Chemistry is usually offered every fall but has a time conflict with CM 4855, which is required for senior chemical engineering students.
  • CM 4060 Undergraduate Research in Polymer Engineering is offered on demand. If you are interested in doing undergraduate research in the chemical engineering department then you will need to talk to the faculty who are doing research in the polymer engineering area to see if they have a project that you can work on with them. The faculty currently doing research in this area are Dr. Liu and Dr. Ong.
  • CM 4650 Polymer Rheology is no longer offered because the faculty retired.
  • ENG 4515 Introduction to Sustainability and Resilience is usually offered every fall. To use this class towards the minor you will need to complete a polymer-related term project. Email your topic to the chemical engineering advisor for approval.
  • ENT Enterprise Project Work. Up to 3 credits of Enterprise project work in the polymer science or engineering area may be approved. Email a brief description of your project to the chemical engineering for approval.
  • MEEM 4170 Failure of Materials in Mechanics is usually offered every spring.
  • MEEM 4635 Design with Plastics has not been offered recently. You will need to check with the Mechanical Engineering Department to see when it will be available next.
  • MSE 4430 Composite Materials is usually offered every spring.
  • Undergraduate Research in the polymer science and engineering area from other departments may be approved. Email a brief description of your research to the chemical engineering advisor for approval. Several students have done polymer chemistry research with Dr. Heiden in the Chemistry Department, as one example.

What do I need to know to plan out a mineral processing minor?

If you are interested in adding the mineral processing minor to your record then you’ll need to email your list of planned classes for completing the minor, along with the semester in which you plan to take the courses, to the chemical engineering advisor. We require this to ensure that you’ll be able to complete the minor in the time frame that you need. Then you will need to request the addition of the minor from your MyMichiganTech webpage. Directions for how to do this are on the minor page of the Registrar’s Office, Degree Services webpage.

When planning your minor courses, make sure you have a listing of the most current requirements for the minor. You can get this on the Registrar’s Office, Degree Services webpage. The listing of requirements that you are looking for is called the “minor audit”.

You will need to plan ahead because many of the minor classes have prerequisites that you need to complete first. The prerequisites can be found in the course descriptions or on the minor audit. Course descriptions are in Michigan Tech’s Undergraduate Catalog

Finally, once you’ve figured out the classes that you’ll be taking to complete the minor, you should meet with your major advisor to determine if any (or all!) of the classes for your minor can also be counted towards your major requirements. 

Here is some additional information that may help you with planning this minor. The typical schedule for when classes are offered is listed below, but this can change from year-to-year. The schedule of classes for the following academic year is published in February and so you’ll want to check it once it’s available.

For the required courses:

  • CM 2200 Intro to Minerals and Materials is usually offered every fall semester.
  • CM 3830 Mineral Processing and Extraction Lab is usually offered every spring semester.
  • GE 2300 Mineral Science is usually offered every fall semester. This course includes a lecture and laboratory.

For the thermodynamics courses, check with the department offering the course for the expected planned schedule.

For the elective courses:

  • CM 3825 Sampling, Statistics, and Instrumentation is usually offered every other spring during odd years, such as Spring ’23, Spring ’25, etc.
  • CM 4020 Undergrad Research in Mineral Processing Engineering is offered on demand. If you are interested in doing undergraduate research then you will need to talk to the faculty who are doing research in the mineral processing area to see if they have a project that you can work on with them. The faculty currently doing research in this area is Dr. Eisele and Dr. Pan.
  • CM 4505 Particle Technology is usually offered every other spring during even years, such as Spring ’22, Spring ’24, etc.
  • CM 4510 Interfacial Engineering is usually offered every other spring during odd years, such as Spring ’23, Spring ’25, etc.
  • CM/MSE 4740 Hydrometallurgy/Pyrometallurgy is usually offered every spring.
  • EC 4630 Mineral Industry Economics is usually offered every other spring semester and requires principles of economics as a prereq. However it hasn’t been offered recently and so you’ll need to check with the College of Business to see when it will be available next.
  • ENT XXXX Enterprise Project Work. If you are doing work in Enterprise that is in the mineral processing area then up to three credits of Enterprise may be approved to use towards the minor. Email a brief description of your project for each of the semesters that you wish to be considered for approval to the chemical engineering advisor.
  • GE 3400 Drilling and Blasting is usually offered every fall and requires additional prerequisites. However, if you have already completed both PH 2100 University Physics I and CM 2200 Intro to Minerals and Materials, then you might be able to get permission to enroll in the class. Contact the instructor of the course for consideration.
  • GE 4360 Bulk Material Dynamics and Engineering is usually offered every spring and requires additional prerequisites. However, if you are a chemical engineering student who has already completed both PH 2100 University Physics I and CM 3110 Transport & Unit Operations I, then you might be able to get permission to enroll in the class. Contact the instructor of the course for consideration.
  • MSE 2121 Materials Characterization I and MSE 2122 Materials Characterization I Lab are offered every spring and require additional prerequisites and so you’ll need to plan ahead.