Category: Mechanical and Aerospace Engineering

In Memory of Dr. Bill Predebon

We are deeply moved and saddened at the passing of Dr. Bill Predebon.

Dr. William W. Predebon, emeritus professor and retired chair of the Department of Mechanical Engineering-Engineering Mechanics (ME-EM), passed away on July 21. He was a beloved member of the Michigan Tech community.

Bill dedicated much of his life to building and supporting the ME-EM department, and the impacts of this work will continue to be felt well into the future. We lost a great friend and stalwart supporter of the department and University.

Information about Bill’s upcoming Celebration of Life Ceremony is available on the O’Neill-Dennis Funeral Home website.

Bill was born in Trenton, New Jersey, to Walter and Josephine Predebon. After high school Bill attended the University of Notre Dame where he received his bachelor’s of science in Engineering Science.

While at Notre Dame, Bill boxed for the Bengal Bouts, founded by Knute Rockne, which was a charity event whose proceeds benefited the Holy Cross missions in Bangladesh. He competed in the 155 lb division and was the boxing champion at Notre Dame in 1964. Through his undergrad, he developed lifelong friendships, and it is where he met his future wife of 56 years, Mary Ann Montgomery. Bill was in the Army/ROTC as a commander of the Irish Moroder’s Drill Team. Upon graduation, Bill was commissioned as a Lieutenant and he would eventually be promoted to Captain later in life.

He received both his masters and doctorate from Iowa State University. In 1967, while pursuing his degrees, he married Mary Ann and they were blessed with two beautiful children, Nadine and Bill Jr. Predebon. After his PhD, he was stationed at Aberdeen Proving Ground in Maryland. He then stayed on as a civilian after his military obligation was fulfilled. In 1975, Bill and his family moved to Houghton, Michigan, where he took a job as a Professor at Michigan Technological University (MTU).

Throughout his career at MTU, Bill earned recognition for advancing engineering education. He retired in June, 2022, after 25 years as the Chair of the Department of Mechanical Engineering-Engineering Mechanics (ME-EM) and nearing 47 years at the University. Under his watch, the department made great strides in conducting interdisciplinary research, growing the doctoral program, expanding research funding, and updating the curriculum and labs.

He led the ME-EM Department to rapidly evolve its educational methods, infusing into undergraduate and graduate curriculum the knowledge and critical skills to use big data, machine learning, and artificial intelligence in solving engineering design problems.

A Fellow of the American Society of Mechanical Engineers (ASME), Bill has received numerous additional honors at MTU, including membership in the Academy of Teaching Excellence; the Outstanding Service Award for his work with the student chapter of the Society of Automotive Engineers; the first annual Martin Luther King Award by the Black Student Organizations; and the Distinguished Teaching Award, the Honorary Alumni Award, and the Diversity Award.

Bill led efforts to create the Michigan Tech Learning Resource Center for Self-Paced Programmed Instruction, the ME-EM Engineering Learning Center, as well as a distance learning doctorate degree in mechanical engineering, and a Design Engineer Certificate program with General Motors in 2000. More than 600 GM employees earned the certificate.

He received the Distinguished Faculty Award from the Michigan Association of Governing Boards of Colleges and was inducted into the Pan American Academy of Engineering, which brings together engineers from across the continent of North America, South America, and Mexico—a total of 18 countries.

Throughout his life, exercise was an important part of his lifestyle; many may know he was a fixture at the MTU Student Development Complex’s gym. He was a huge supporter of the MTU sports teams; he was a season ticket holder to volleyball, basketball, football, and ice hockey. This also was evident outside of his duties at MTU, where he was known as “Coach Wally”. He enjoyed coaching his son and teammates from little league, senior league and legion baseball. Bill was also a figure on the alpine ski hill, supporting his children’s ski endeavors in the Central United States Ski Association and Houghton High School Ski Team.

Bill was passionate about whatever he did, whether it be his strong work ethic, his family, or his devotion to faith. Throughout his life, his curiosity fueled the continued pursuit of knowledge.

He was predeceased by his parents and his brother, Walter.

Surviving him are: His wife: Mary Ann Predebon; His daughter: Nadine (Jeff Beaupre) Predebon; His son: Bill (Sheri) Predebon Jr.; His grandson: Tyler (Sarah) Brooks; His granddaughter: Madison Brooks; His half-sister: Patty Davis; His feline companion: Poe.

Read more:

Dr. William Predebon Retires Today After 47 Years at Michigan Tech

Join Professor Brad King at MTU Alumni Reunion Friday, August 4

Brad King portrait
“Small satellites are changing the way humans do business and science in space,” says Professor Brad King.

Special Guest: Dr. Brad King
R.L. Smith Bldg., Room 111
Friday, August 4, from 3-4 p.m.

Please register to join in person or via Zoom.

Join Dr. Brad King during Michigan Tech’s annual Alumni Reunion to learn about the role of engineering as it relates to maneuvering satellites in orbit. The title of his presentation is “Michigan Tech is Propelling the Small Satellite Revolution.”

Not on campus? You’re invited to join via Zoom. No Zoom or alumni reunion registration is required. Your presence will be anonymous to other attendees. All are welcome. You’ll find the direct Zoom link here (just scroll down to see it).

Dr KIng is the Richard and Elizabeth Henes Endowed Professor (Space Systems), Mechanical Engineering- Engineering Mechanics. He also serves as director of the ME-EM Space Systems Research Group. He founded Orbion Space Technology in 2016 to develop and manufacture revolutionary plasma propulsion systems for small satellites.

Orbion Space Technology is one of only a few companies in the brand-new propulsion system market. The company was conceived at Michigan Tech and established its base in Houghton.

Dr. King is the founder and faculty advisor of Michigan Tech’s Aerospace Enterprise team, where he empowers undergraduate students to design, build, and fly spacecraft, too. One of the team’s student-built satellites (Oculus) is now in orbit; their second small satellite (Stratus) is due to launch in 2022, and a third (Auris) now in progress.

“Small satellites are changing the way humans do business and science in space,” says King. “The cost to build and launch a small satellite is now about the same as the cost to build and launch a software app. With the cost barrier removed, innovative students and start-up companies are building small satellites to provide capabilities that my generation has never even dreamed about. Michigan Tech is on the forefront of this movement.”

To attend this event in person at the R. L. Smith Mechanical Engineering-Engineering Mechanics Building, register for Alumni Reunion 2023. The event is free, but a ticket is required to attend. The deadline to register is midnight Sunday, July 23, 2023.

Read More:

Origins of Orbion: When Preparation Meets Opportunity

Brad King: Bite-sized Satellites Changing the World!

Brad King: Space, Satellites and Students

Enterprise at MTU Launches Spacecraft—and Careers

Watch:

Play 106: Aerospace video
Preview image for 106: Aerospace video

106: Aerospace

MTU Blizzard Baja Team Succeeds at Baja SAE Competition

“It’s only up from here,” wrote Michigan Tech’s Blizzard Baja team after their success in Oshkosh. Follow the team on Instagram. They’re also on Twitter and Facebook.

Michigan Tech’s Blizzard Baja team took home an 8th place finish at the recent Baja SAE North American Competition in Oshkosh, Wisconsin in May. 

In addition to a steering arm failure, the pit team also had to deal with mud build up during the race.

“Our 8th place finish was sealed by a 4th place finish in the final 4-hour Endurance event Sunday morning,” says team faculty advisor, Assistant Teaching Professor Kevin Johnson. “We were in 2nd place in the Endurance event for a long time until we had a steering arm failure on the car. The team quickly replaced the steering knuckle in the pits and got back on the track with a half hour remaining in the race. Regardless of this setback we were able to finish in 4th place.”

Earlier in the race, the team received a black flag, due to their car numbers not being visible due to mud buildup. The team had to enter the pit to clean them off, which set them back a bit, as well.

“This year we had a very strong team with outstanding participation,” adds Johnson. “The team had two major obstacles; a working reliable 4 wheel drive system and a new larger Kohler engine to replace the Briggs that had been used for many years previously.”

The team raced with their newest vehicle, the Matador.

Michigan Tech’s Blizzard Baja is one of 25 Enterprise teams, part of Michigan Tech’s award-winning Enterprise Program.

The Blizzard Baja team consists of numerous sub-teams. One of those, the 4×4 Senior Design team with members William Rivet and Alec Pominville, scrapped the 4×4 design from last year due to major issues. “They went through some iterations including a belt and a chain drive and finally ended up with a drive shaft, gearbox, and differentials design,” notes Johnson. “They put countless hours into design, manufacturing, and testing the last two semesters with help from a number of other students.”

This year, Michigan Tech served as host to Fei Baja, the SAE Baja team from Centro Universitário FEI, a university in São Bernardo do Campo, Brazil. “The team from Brazil contacted our team through social media asking if MTU Baja SAE would be willing to host them,” said Johnson. It turned out to be a fantastic experience for both teams.

MTU Blizzard Baja hosted friends from Brazil, team Fei Baja, during the competition.

“The best part of the competition was seeing all of our hard work pay off in the form of a top 10 finish,” said Gregory Jowett, a mechanical engineering student who serves as President of Michigan Tech’s Blizzard Baja SAE team. 

“Whether someone was directly working on the vehicle, doing modeling or simulation, or making sure the trip ran smoothly, it’s incredibly rewarding to see everyone’s effort culminate in a successful experience like it did in Oshkosh,” he says.

“I am extremely proud of the entire team and feel they represented Michigan Tech very well.”

Prof. Kevin Johnson, Blizzard Baja faculty advisor

“Needing to modify our frame to pass technical inspections and breaking an a-arm during the endurance race were some of the larger setbacks we faced. In both cases, the team was able to efficiently work together to quickly solve both problems. Even after an early morning and 3.5 hours of racing, the team was able to replace the a-arm in the pits and get our driver back out on the track in less than 10 minutes.”

The success experienced by our team is a direct reflection of Blizzard Baja’s “work hard, play hard” culture,” adds Jowett. “We enjoy team bonding when we have free time, but when there are things to do, none of our members hesitate to selflessly step up and get things done.”

“Props to our pit crew!”

Gregory Jowett, Blizzard Baja president

As for joining the team, the Blizzard Baja enterprise conducts interviews for prospective new members twice per year. For more information, students can visit the website at baja.mtu.edu or email the team at baja@mtu.edu.

Learn more about the team online at https://baja.mtu.edu.

Michigan Tech ARES Team Competes in Tuscaloosa

The Michigan Tech ARES team is ready to roll.

A student engineering team from Michigan Tech is competing this week in the Robotic Mining Challenge, hosted by the University of Alabama in Tuscaloosa. 

Michigan Tech team prepares ARES for competition. Go Huskies!

The event is designed to create solutions to problems faced on moon exploration missions, with 24 university teams from across the nation taking part.

Each team has spent the past year designing and building a robot that uses resources available on the lunar surface. During the competition, robots must autonomously navigate a lunar-simulated arena and excavate lunar soil, or regolith.

Michigan Tech’s robot, ARES, completed a 15 minute practice runs on Wednesday, May 24. ARES stands for Automated Regolith Excavation System. The name was selected after a brainstorm and voting, says Mechanical Engineering-Engineering Assistant Professor Paul van Susante, the team’s faculty advisor.

Ten of the Michigan Tech team’s 28 members are on site. That includes team lead Karson Linders (mechanical engineering and robotics engineering); Brian Geiger (mechanical engineering); Miranda Meyers (electrical engineering); Brenda Wilson (electrical engineering); Christi LeCaptain (mechanical engineering); Tanner Duncan (mechanical engineering); Collin Miller (mechanical engineering); Ian Giles (robotics engineering); Kyle Hintz (mechanical engineering); and Brendan McRoberts (mechanical engineering).

Many of the students are current or former members of MINE, the Multiplanetary INnovation Enterprise at Michigan Tech, which is also advised by Prof. van Susante. Several of the students recently graduated in April.

Michigan Tech’s ARES robot takes part in at test run at the 2023 Robotic Mining Challenge.

Throughout the week, teams will receive one 15-minute practice run and two competition runs. Practice runs will take place May 22-23 with the challenge beginning the afternoon of May 23 and continuing through May 26.

“We were overall pleased with our first competition run,” said van Susante. “Everything worked, but needed tweaking. “We have learned many things that we will improve today and all day tomorrow before our final competition run on Friday.”

Judges of the competition include industry professionals from Caterpillar, the Exolith Lab at the University of Central Florida and NASA’s Solar System Exploration Research Virtual Institute. 

The Robotic Mining Challenge Award ceremony takes place Friday evening. The Michigan Tech team will travel back to Houghton the next day.

This contest is separate from the NASA Lunabotics Competition, hosted at Kennedy Space Center.

SWE Section Travels to SWE-Wisconsin Professional Day

Very large group of women at SWE Spring Forward 2023.
Image from SWE-Wisconsin Spring Forward 2023 Facebook page.

Last Saturday (April 15, 2023), MTU’s Society of Women Engineers (SWE) section attended the Annual SWE-Wisconsin Professional Day in Madison. We enjoyed visiting with the SWE-Wisconsin Professional Section, developing career skills and learning about engineering opportunities.

  • Gretchen Hein, SWE advisor, led an #IamRemarkable workshop, where participants learned how to advocate for themselves and others, and the importance of those skills in career development.
  • Second-year student Kathryn Krieger (environmental engineering) was honored as the 2023 GE-Healthcare Scholarship recipient. The scholarship committee was impressed with her involvement in SWE, Engineers without Borders and Delta Phi Epsilon.
  • The section received the Collegiate Section Achievement Award for establishing the SWE Section Endowed Scholarship.
  • We were also excited to see Andrea Falasco ’12 (B.S. Mechanical Engineering) and learn about her career path during the panel discussion on working for big versus small companies.

Nine section members attended:

  • Amanda West, junior (mechanical engineering):
    “I enjoyed networking with the other SWE sections in the region. It was great to learn how other students handle their organization and use it to help improve our own.”
  • Talia Olson, junior (mechanical engineering):
    “I enjoyed getting inspired by other women engineers and learning from their experiences. I learned how to brand myself and to own my strength in the workforce.”
  • Cassandra Borr, second-year (mechanical engineering):
    “I found this conference to be very empowering, as we were able to see what other women in the industry have accomplished and how they achieved it.”
  • Carissa Best, first-year (mechanical engineering):
    “I really enjoyed having the opportunity to hear the stories of confident women in STEM who were interested in empowering other women.”
  • Kathryn Krieger, second-year (environmental engineering):
    “SWE has grown to be such an important part of my college career. I am constantly inspired by the women around me and grateful for the opportunities for both personal and professional growth.”
  • Catherine Huston, second-year (materials science and engineering): 
    “Learning to own who I am and how to recognize my accomplishments was empowering and an experience I will carry with me as I navigate my path in life.”
  • Tory Cantrell, first-year (mechanical engineering):
    “The most important piece of advice that I will take away from this conference is how it is important to step outside of your comfort zone and evolve your leadership brand as you grow.”
  • Rixlie Fozilova, graduate student (environmental engineering):
    “The Spring Forward SWE conference provided me with an amazing opportunity to network with fellow engineering students and professionals from a wide variety of companies and backgrounds.”
  • Lydia Minzey, first-year (environmental engineering):
    “The conference empowered participants to believe in their abilities and reach out to achieve their full potential, even while being a minority in their field. I’m very grateful to have been able to attend and learn from the wise women present.”

SWE thanks the College of Engineering and engineering departments for supporting SWE throughout the year. We also thank the Undergraduate Student Government and our corporate sponsors, whose support made this travel possible.

By Gretchen Hein, Advisor, Society of Women Engineers.

Two Michigan Tech Alumni Elected to the National Academy of Engineering

Congratulations to Michigan Tech alumni Dr. Markus J. Buehler ’01 and Dr. Kevin Tomsovic ’82. Both have been elected to the National Academy of Engineering, among the highest international professional distinctions accorded to an engineer.

Dr. Markus Buehler

Dr. Buehler is honored for implementing the use of nanomechanics to model and design fracture-resistant bioinspired materials. He is the Jerry McAfee (1940) Professor in Engineering, in the Department of Civil and Environmental Engineering at Massachusetts Institute of Technology, Cambridge.

Dr. Tomsovic is honored for contributions to power system computational methods and power engineering education. He is Chancellor’s Professor in the Min H. Kao Department of Electrical Engineering and Computer Science at the University of Tennessee, Knoxville.

Dr. Buehler earned his BS equiv. in Process and Chemical Engineering at the University of Stuttgart, his MS in Engineering Mechanics at Michigan Tech, and his PhD in Materials Science (Chemistry) at Max Planck Institute of Metals Research at the University of Stuttgart. He was a postdoctoral scholar in the Division of Chemistry and Chemical Engineering, California Institute of Technology. His research interests include the materials science and mechanics of natural and biological protein materials in the field of materiomics—the holistic study of material systems—and one which he has pioneered. One focus is how protein materials define our body and how they fail catastrophically through fracture, deformation, and disease. His activities in LAMM, his research Laboratory for Atomistic and Molecular Mechanics, include developing a new paradigm that designs materials from the molecular scale, with multi-scale modeling, additive manufacturing, 3D printing, and experimental synthesis.

Dr. Kevin Tomsovic

Dr. Tomsovic earned his BS in Electrical Engineering at Michigan Tech and his MS and PhD in Electrical Engineering at the University of Washington. He also served as the Kyushu Electric Endowed Chair for Advanced Technology for Electrical Energy with Kumamoto University in Japan and was the National Science Foundation program director with the Electrical and Communications Systems Division of the Engineering Directorate. He has held faculty positions at National Cheng Kung University in Taiwan and the Royal Institute of Technology in Sweden. His research interests include intelligent systems and optimization methodologies that can be applied to various power system problems—developing technology for the operation and planning of the modern power grid that can achieve low cost, reliable power with reduced environmental impact. At UT he directs the Center for Ultra-wide-area Resilient Electric Energy Transmission Networks (CURENT), a graduated National Science Foundation and Department of Energy Engineering Research Center.

About NAE

Founded in 1964, the National Academy of Engineering is a private, independent, nonprofit institution that provides engineering leadership in service to the nation. Its mission is to advance the welfare and prosperity of the nation by providing independent advice on matters involving engineering and technology, and by promoting a vibrant engineering profession and public appreciation of engineering.

New members of the NAE will be formally inducted in October 2023 at the NAE’s annual meeting.

Engineering Students Place High in the 2023 Graduate Research Colloquium

Researcher standing by her poster.
Tania Demonte Gonzalez

On behalf of the Graduate Student Government (GSG), we would like to express our heartfelt gratitude to all the participants, judges, sponsors and collaborators who made the 2023 Graduate Research Colloquium (GRC) a resounding success. Last week, we witnessed over 80 presentations from graduate students all across the campus, showcasing their outstanding research, creativity and academic excellence.

The GRC ended on a high note with the banquet and award ceremony on Thursday (March 30). We would like to extend our warmest congratulations to the GRC award winners for their exceptional work and dedication.

This year’s GRC winners are:

Poster Presentations

  • First Place: Tania Demonte Gonzalez (ME-EM)
  • Second Place: Roya Bagheri (ME-EM)
  • Third Place: Shreya Joshi (Physics)

Oral Presentations

  • First Place: Tania Demonte Gonzalez (ME-EM)
  • Second Place: Kyle Wehmanen (KIP)
  • Third Place: Jordan Ewing (GMES)

We would also like to thank our esteemed judges for their invaluable time, expertise and insightful feedback. Your participation has been crucial to the success of the GRC and the development of our graduate students.

Our sincere appreciation goes to our sponsors and collaborators — the College of Arts and Sciences, College of Computing, and College of Engineering, the Dean of Students Office, and the Graduate School — for their generous support and partnership. Your contributions have made it possible for us to provide a platform for our graduate students to showcase their research and build their professional networks.

Once again, we thank everyone who participated in and supported the GRC. Your engagement and enthusiasm have made this event a remarkable and memorable experience. We look forward to seeing you again at the next GRC.

By the Graduate Student Government.

Tania Demonte Gonza presented on “Nonlinear Model Predictive Control of a Wave Energy Converter.”

Roya Bagheri presented on “Electrical Stimulation for Maturation of Heart Muscle Cells.”

Jordan Ewing presented on “Remote Sensing using Machine Learning for Off-Road Mobility.”

2023 Graduate Research Colloquium: GLRC Student Award Winners

Congratulations to the Great Lakes Research Center (GLRC) Student Poster Award winners, in recognition of World Water Day, at the Graduate Student Government Graduate Research Colloquium last week:

  • First Place: Cassandra Reed-VanDam (CFRES)
  • Second Place: Michelle Bollini (CEGE)
  • Third Place: Mitch Kehne (BioSci)

By the Great Lakes Research Center.

Michelle Bollini presented on “Dynamic Bioaccumulation Model for a mining impacted Aquatic Ecosystem.”

Joint ROTC Commissioning Ceremony April 28, 2023

Cadets at the ceremony.

The Air Force and Army ROTC invite you to the Spring 2023 Commissioning Ceremony on Friday (April 28) from 7-9 p.m. at the Rozsa Center.

This semester we have 11 Air Force cadets and five Army cadets commissioning. Those commissioning are from the following programs:

Biological Sciences | Civil Engineering | Computer Science | Cybersecurity | Electrical Engineering | Engineering Fundamentals | Engineering Management | Environmental Engineering | Forestry | Mathematics | Mechanical Engineering | Physics

We will also be streaming the ceremony if you prefer to watch it live on YouTube. The stream will go live 15 minutes prior to the ceremony.

By Air Force and Army ROTC.

Design Expo 2023: Awards Results!

Michigan Tech’s Design Expo 2023 was a huge success. Many thanks to our hardworking students—and the faculty advisors who generously and richly support them.

Hundreds of Michigan Tech students presented their innovative work last week at Michigan Tech’s 23rd annual Design Expo. Each project entails hands-on, experiential, discovery-based learning. Teams competed for cash awards totaling nearly $4,000.

“Design Expo gives students an opportunity to showcase their creativity and innovation,” says Nagesh Hatti, who oversees Enterprise.

“The students,” adds Leonard Bohmann, associate dean of the College of Engineering, “create new things, solve global problems and make lives better.”

Many of the Senior Design and Enterprise projects on display at Design Expo are supported by external industry sponsors, allowing students to gain valuable experience through direct exposure to real industrial problems.

In Senior Design, students explore and solve real industry challenges throughout their senior year—from ideation to realization. In the Enterprise Program, teams of first- through fourth-year students from a variety of disciplines operate much like real companies to develop products, services and solutions. 

Project Sponsors Support Michigan Tech’s Educational Mission

“Project sponsors generously support our educational mission by providing invaluable project experiences, along with guidance and mentorship for our students,” adds Hatti. “Industry and academia working together as partners in higher education give our students a tremendous learning experience.”

Design Expo’s industry event sponsors make Design Expo, a large campus event, possible. “Their generous support often continues year after year,” says Hatti.

Thompson Surgical Instruments is Design Expo’s 2023 executive partner. ITC Holdings is the event’s directing partner for the 12th consecutive year, joined by fellow directing partner Aramco. And Plexus, OHM Advisors, Altec Inc. and Husky Innovate are collaborating partners.

This year, more than 100 student teams competed for awards. A panel of judges, made up of corporate representatives, community members, and Michigan Tech staff and faculty members, critiqued the projects. “Our esteemed judges give their time and talent to help make Design Expo a success,” adds Hatti.

The judges’ scoring was used to arrive at the awards. Visit the Design Expo website awards page to see the full list of award winning teams (and project videos, too).

The College of Engineering and the Enterprise Program are pleased to announce award winners, below. Congratulations and thanks to ALL teams for a very successful 2023 Design Expo!

ENTERPRISE

FIRST PLACE

Velovations, Michigan Tech’s Bicycle Design Enterprise team, took first place in the Enterprise category at the 2023 Design Expo.

123: Velovations

Led by: Ethan McKenzie and Michael Balentine, Mechanical Engineering

Advised by: Steve Lehmann, Biomedical Engineering

Sponsored by: Cleveland Cliffs, Tongy Senger Innovations, Milwaukee Tools


SECOND PLACE

Michigan Tech’s Aerospace Enterprise team took second place in the Enterprise category.

106: Aerospace Enterprise

Led by: Seth Quayle, Mechanical Engineering and Kyle Bruursema, Electrical Engineering

Advised by: L. Brad King, Mechanical Engineering-Engineering Mechanics

Sponsored by: Air Force Research Laboratory (AFRL)


THIRD PLACE

104: Supermileage Systems

Supermileage Systems Enterprise took third place in the Enterprise category.

Led by: Olivia Zinser and Ben Klein, Electrical Engineering

Advised by: Rick Berkey, Manufacturing and Mechanical Engineering Technology

Sponsored by: GM, Aramco Americas, Oshkosh, Milwaukee Tool, A&D Technology – GIK, and Dana


HONORABLE MENTION

117: Innovative Global Solutions

The Innovative Global Solutions Enterprise team earned an Honorable Mention in the Enterprise category.

Led by: Cynthia Wurtz, Mechanical Engineering and Riley Dickert, Physics

Advised by: Radheshyam Tewari, Mechanical Engineering-Engineering Mechanics and Nathan Manser, Geological and Mining Engineering

Sponsored by: Tree Frog Aquagric

SENIOR DESIGN

FIRST PLACE

233: Social Engineering for High School Students

College of Computing students Kayla Blunt and Connor Langdon won first place in the Senior Design Category for their project, Social Engineering for High School Students

Team Members: Connor Langdon, Cybersecurity and Kayla Blunt, Computer Network and System Administration

Advised by: Tim Van Wagner and Victoria Walters, Applied Computing


SECOND PLACE

232: Shot Sleeve Re-design for Steel High Pressure Die Casting (HPDC)

A team of five Materials Science and Engineering students won second place for their senior design project, Hot Sleeve Re-design for Steel High Pressure Die Casting, sponsored by Mercury Marine

Team Members: Ryan Cesario, Henry Summers, Victoria Berger, Caleb Minasian, and Katherine Jarvis, Materials Science and Engineering

Advised by: Paul Sanders and Walter Milligan, Materials Science and Engineering

Sponsored by: Mercury Marine


THIRD PLACE

214: Design of a Method to Characterize the Depletion Mode Medical Device Battery – Phase 2

This team of biomedical engineering students earned third place for their senior design project, which was sponsored by the US Food and Drug Administration’s Center for Devices and Radiological Health: Design of a Method to Characterize the Depletion Mode Medical Device Battery – Phase 2.

Team Members: Cole Hebert, Cameron Karnosky, Kristin King, William Poster, and Kelsey Moyer, Biomedical Engineering

Advised by: Orhan Soykan and Smitha Rao, Biomedical Engineering

Sponsored by: U.S. Food and Drug Administration, Center for Devices and Radiological Health (CDRH)


HONORABLE MENTION

224: Movable Bookshelf Network

This team of ECE students earned an honorable mention in the senior design category for their project, Movable Bookshelf Network.

Team Members: Spencer Crawford and Ryan Briggs, Computer Engineering and Josh Cribben and Emily Fischer, Electrical Engineering

Advised by: Kit Cischke, Department of Electrical and Computer Engineering

Sponsored by: Michigan Tech Van Pelt and Opie Library


HONORABLE MENTION

227: Physiological Sensing Using a Smart Port-a-Cath

This team’s project, Physiological Sensing Using a Smart Port-a-Cath was sponsored by Lifebridge Health. They earned an honorable mention in the senior design category.

Team Members: Marli Hietala, Savannah Page, Etienne Michels, Ali Dabas and Giovanni Diaz, Biomedical Engineering

Advised by: Sean Kirkpatrick, Biomedical Engineering

Sponsored by: LifeBridge Health

HONORABLE MENTION

231: Renewable Energy Powered Portable Plastic Waste Breakdown Machine

This team of ECE and mechanical engineering students earned an honorable mention in the senior design category for their project, Renewable Energy Powered Portable Plastic Waste Breakdown Machine, sponsored by ITC.

Team Members: Aaron Hogue and Hunter Indermuehle, Electrical Engineering, Ruizhi Ma, Computer Engineering and Zarvan Chinoy, Mechanical Engineering

Advised by: John Lukowski, Electrical and Computer Engineering

Sponsored by: ITC Holdings Corp.

HONORABLE MENTION

237: Utilizing Motor Oil to Rejuvenate RAP Materials

This civil engineering team earned an honorable mention for their senior design project, Utilizing Motor Oil to Rejuvenate Recycled Asphalt Pavement (RAP) Materials.

Team Members: Kira Olson, Construction Management, Alli Hummel, Jacob Cleaver, and AJ Clarey, Civil Engineering

Advised by: Zhanping You, Civil, Environmental, and Geospatial Engineering

Sponsored by: Department of Civil, Environmental, and Geospatial Engineering

Design Expo Innovation Awards (Based on Application)

FIRST PLACE

301: AAA [Affordable, Accessible, Authentic] Prosthesis
Advised by: Jon Herlivich, Chemical Engineering

The AAA team won a first place Design Expo Innovation Award. They are part of Michigan Tech’s Consumer Product Manufacturing Enterprise.

SECOND PLACE

The Implantable Pulse Generator (IPG) and Lead team earned a second place in the Design Expo Innovation Award.


203: Implantable Pulse Generator (IPG) and Lead
Advised by: Jingfeng Jiang and Chunxiu (Traci) Yu, Biomedical Engineering

THIRD PLACE

237: Utilizing Motor Oil to Rejuvenate RAP Materials
Advised by: Zhanping You, Civil, Environmental, and Geospatial Engineering

Engineering Students Interviewed About Design Expo 2023

Two students seating outside near the waterfront next to an off-road vehicle.
Mechanical engineering students in the Blizzard Baja Enterprise.

Michigan Technological University opens Design Expo to underclassmen

Briana Tucker and Nagesh Hatti (Enterprise) were quoted by WZMQ 19 News in coverage of Michigan Tech’s 2023 Design Expo, held Tuesday (April 18) at the Van Pelt and Opie Library and Memorial Union Building.

The Michigan Tech Baja Racing Team showcased their new car at the expo as well. This year they’ve been mandated to build a four-wheel car in order to compete and the team says they use the tools from class in every cylinder of their project.

Read more at WZMQ 19 News, by Mitchell Rife.

Michigan Tech University holds 23rd annual Design Expo with wide project variety

Tucker, senior Ryan Peckham (electrical engineering) and first-year engineering student Andrew Brenner were interviewed for a WLUC TV6 broadcast segment, and first-year chemical engineering students Ethan LeGrave, Veronica North, and Bailey Wright were mentioned in the accompanying story.

The Wireless Communications Enterprise (WCE) team showcased several of their projects.

Read more at WLUC TV6, by Colin Jackson.

Feats of innovation

The Daily Mining Gazette also covered Expo, mentioning students Breanna Gorman and Cade Meyer.

Breanna Gorman, president of the Enterprise team and fourth-year electrical engineering major showcased a portable battery pack intended for military backpacks.

Cade Meyer, a fourth-year mechanical engineering student was part of the Velovations Enterprise team. They focus on bicycle design projects.

Read more at the Daily Mining Gazette, by Aidan Reilly.