Manufacturing and Mechanical Engineering Technology Archives | Page 2 of 5

MTU Blizzard Baja Team Succeeds at Baja SAE Competition

Published May 25, 2023

“It’s only up from here,” wrote Michigan Tech’s Blizzard Baja team after their success in Oshkosh. Follow the team on Instagram. They’re also on Twitter and Facebook.

Michigan Tech’s Blizzard Baja team took home an 8th place finish at the recent Baja SAE North American Competition in Oshkosh, Wisconsin in May.

In addition to a steering arm failure, the pit team also had to deal with mud build up during the race.

“Our 8th place finish was sealed by a 4th place finish in the final 4-hour Endurance event Sunday morning,” says team faculty advisor, Assistant Teaching Professor Kevin Johnson. “We were in 2nd place in the Endurance event for a long time until we had a steering arm failure on the car. The team quickly replaced the steering knuckle in the pits and got back on the track with a half hour remaining in the race. Regardless of this setback we were able to finish in 4th place.”

Earlier in the race, the team received a black flag, due to their car numbers not being visible due to mud buildup. The team had to enter the pit to clean them off, which set them back a bit, as well.

“This year we had a very strong team with outstanding participation,” adds Johnson. “The team had two major obstacles; a working reliable 4 wheel drive system and a new larger Kohler engine to replace the Briggs that had been used for many years previously.”

The team raced with their newest vehicle, the Matador.

Michigan Tech’s Blizzard Baja is one of 25 Enterprise teams, part of Michigan Tech’s award-winning Enterprise Program.

The Blizzard Baja team consists of numerous sub-teams. One of those, the 4×4 Senior Design team with members William Rivet and Alec Pominville, scrapped the 4×4 design from last year due to major issues. “They went through some iterations including a belt and a chain drive and finally ended up with a drive shaft, gearbox, and differentials design,” notes Johnson. “They put countless hours into design, manufacturing, and testing the last two semesters with help from a number of other students.”

This year, Michigan Tech served as host to Fei Baja, the SAE Baja team from Centro Universitário FEI, a university in São Bernardo do Campo, Brazil. “The team from Brazil contacted our team through social media asking if MTU Baja SAE would be willing to host them,” said Johnson. It turned out to be a fantastic experience for both teams.

MTU Blizzard Baja hosted friends from Brazil, team Fei Baja, during the competition.

“The best part of the competition was seeing all of our hard work pay off in the form of a top 10 finish,” said Gregory Jowett, a mechanical engineering student who serves as President of Michigan Tech’s Blizzard Baja SAE team.

“Whether someone was directly working on the vehicle, doing modeling or simulation, or making sure the trip ran smoothly, it’s incredibly rewarding to see everyone’s effort culminate in a successful experience like it did in Oshkosh,” he says.

“I am extremely proud of the entire team and feel they represented Michigan Tech very well.”
Prof. Kevin Johnson, Blizzard Baja faculty advisor

“Needing to modify our frame to pass technical inspections and breaking an a-arm during the endurance race were some of the larger setbacks we faced. In both cases, the team was able to efficiently work together to quickly solve both problems. Even after an early morning and 3.5 hours of racing, the team was able to replace the a-arm in the pits and get our driver back out on the track in less than 10 minutes.”

The success experienced by our team is a direct reflection of Blizzard Baja’s “work hard, play hard” culture,” adds Jowett. “We enjoy team bonding when we have free time, but when there are things to do, none of our members hesitate to selflessly step up and get things done.”

“Props to our pit crew!”
Gregory Jowett, Blizzard Baja president

As for joining the team, the Blizzard Baja enterprise conducts interviews for prospective new members twice per year. For more information, students can visit the website at baja.mtu.edu or email the team at baja@mtu.edu.

Learn more about the team online at https://baja.mtu.edu.

Thought-provoking, Intriguing and Sweet: Huskies Remember One of their Own

Published May 14, 2023

By

round disc-shaped chocolate with gear or wheel shape on top — The winning design, close-up!

Zachary stands on a stone, in front of a roaring waterfall — Zachary’s legacy of kindness and integrity lives on at Michigan Tech.

Winners were announced on April 19th, Zachary Podkul’s birthday.

This year, for the Third Annual Zachary Richard Podkul (ZRP) Memorial Scholarship Challenge, Mechanical Engineering Technology (MET) students honored their fellow Husky’s fondness for Michigan Tech, machine design, cooking—and of course, chocolate!

Six MET students in the Department of Manufacturing and Mechanical Engineering Technology rose to the challenge to design custom chocolates.

The students began their thought process on what to design late last year when the contest was announced at the end of fall semester.

They started out by creating a 3D CAD model of their design. Each chocolate could be no larger than 2”x2”x1”. Next, a 3D print of the model was created in the MMET Department’s Additive Manufacturing facility, using the Stratasys Fortus 400 MC, which uses Fused Deposition Modeling (FDM) to extrude plastic filament.

The students then each built a flask from poster board strips. The flask held their 3D printed patterns (the positive). Food-safe silicone was poured over the top to cast a silicone mold (the negative).

Once set, students removed their silicone mold from the flask, filled the new mold with melted chocolate, chilled it all to delicious perfection, then popped out their chocolate confections to enjoy—and also to be judged as part of the challenge.

MMET faculty members judged the entries by the following criteria:

3D CAD Model—Utilizes sketches fully constrained with parametric features
Originality—Unique and innovative design representative of Michigan Tech
Quality—Uniformity, strength and surface finish
Manufacturability—Ability for chocolate to be easily formed in mold
Detail—The chocolate conforms to the mold intended design

And the winner is…Michael Havens! He won a $1,000 scholarship!

Cathy and Michael stand arm in arm. — Congratulations to Michael Havens!

A plate with a single chocolate on a table, with the mold and 3d print. — Michael’s work: note his 3D printed pattern (black), and his silicon mold (blue).

Michael looks at large computer screen with picture of his wheel-shaped chocolate 3d design — Michael Havens presents his design to the judges.

Justin Hannah earned Second Place and a $500 scholarship.

Justin stands between Cathy and Richard holding his silicon mold. — Congratulations to Justin Hannah!

three chocolates on a white plate with Justin Hannah sign nearby — Justin’s wonderful designs.

David Watkins earned third place and a $250 scholarship.

David Watkins between Cathy and Richard, holding his 3rd place certificate — Congratulations to David Watkins!

Plate of chocolates, plus molds, 3d prints and cookie cutters on a table. — David’s winning work in both white and dark chocolate!

According to the Podkul’s, everyone was a winner!

The Podkul’s also gave gift certificates to the other three MET student who submitted entries: Beaumont Ujlaky, Teresa Hoving, and RJ Slater.

Cathy sits at a table and looks at the judges with her 3dDesign on a big screen behind her. — Teresa Hoving presents to the judges.

Five-sided chocolates on a plate plus a stuffed Husky dog toy and some cookies in cellophane and a blue silicon chocolate mold. — Teresa’s wonderful design

RJ sits at a table with Bryant in the background. Chocolates on a plate in the foreground. — RJ Slater presents his design to the judges.

Beaumont stands and holds his blue chocolate silicon mold with Cathy and Linda on either side — Beaumont Ujlaky, with Cathy Podkul and her sister, Linda Daleo

oval-shaped chocolate on a plate with a Keweenaw peninsula design on the top. — Just one of Beaumont’s chocolates. He designed several.

Nick holds a section of gray 3d print on a piece of plexiglass while Linda looks on. — Linda Daleo, Zachary’s aunt, was on hand for the event. Here she learns about the Stratasys Fortus 400 MC in the Michigan Tech’s AM Lab with MMET Professor of Practice Nick Hendrickson

Bow of cellophane wrapped frosted cookies with cookie cutters on a table. — Cathy kept the student-designed cookie cutters from the 2022 ZRP Memorial Challenge. She hired a professional baker to make delicious cookies using the cutters to share at the event. (Does that mean we’ll enjoy both cookies *and* chocolate at next year’s award ceremony??!!)

Zachary’s family supports the ZRP Design Challenge and an MET student scholarship through their endowment. It’s intended to ease the financial burden for students who share his MTU experience and for those who live with chronic health conditions. Zachary will always be remembered by his Michigan Tech family and alumni.

Want to join the Podkul family in supporting the Zachary Richard Podkul Engineering Memorial Scholarship? Learn more here.

This year, the Podkuls were able to meet all of the students in person who participated. “We were amazed at their designs and the level of detail,” said Cathy. “And we especially enjoyed hearing the thought process that went into their designs.”

The family is at home by an open closet door with board games on the shelf behind them. — Zachary with his mom, Cathy, and sister, Gabby

Zachary wears his cap and gown and has his arm around his father's shoulder. — Zach and his Dad

“Zachary’s best times were his college days here at Michigan Tech.”
Cathy Podkul

A table with Zachary's diploma, and other photos and mementos. — Loving memories of Zachary

During the Challenge award presentation, Cathy shared a bit more about her late son, Zachary, who was born eight weeks premature and fought for his health his entire life. He was diagnosed with Crohn’s disease at the young age of 10, and spent the next 15 years of his life battling the disease. He passed away in 2020.

“From the beginning Zachary had a mechanical mindset,” she said. “As a young boy, he was always inquisitive and curious about how things worked.”

With this passion for knowledge he enrolled in Michigan Tech and graduated in 2018 with a Bachelor of Science in Mechanical Engineering Technology.

Cathy describes Zachary as quiet, conservative, intelligent, original, sensitive, and witty, with a great sense of humor. At times, he was strong-willed and determined, too, which of course made him all the more lovable.

“We miss Zachary so much. It’s such a rewarding feeling to support this and to be able to present the awards on his birthday (April 19). My husband and I are grateful to Dr. Irwin, Bryant Weathers, and the MMET faculty and staff for their time and dedication to making these challenges successful for three years in a row.”

The group stands against a white-painted brick wall. — L to R: Richard Podkul, Bryant Weathers, Cathy Podkul, Linda Daleo, and John Irwin

The Podkuls plan to honor their late son Zachary with an MET Design Challenge every year. What will they come up with next? Details about the 2024 Challenge will be announced in about six months.

SWE Section Travels to SWE-Wisconsin Professional Day

Published May 1, 2023

By

Very large group of women at SWE Spring Forward 2023. — Image from SWE-Wisconsin Spring Forward 2023 Facebook page.

Last Saturday (April 15, 2023), MTU’s Society of Women Engineers (SWE) section attended the Annual SWE-Wisconsin Professional Day in Madison. We enjoyed visiting with the SWE-Wisconsin Professional Section, developing career skills and learning about engineering opportunities.

Gretchen Hein, SWE advisor, led an #IamRemarkable workshop, where participants learned how to advocate for themselves and others, and the importance of those skills in career development.
Second-year student Kathryn Krieger (environmental engineering) was honored as the 2023 GE-Healthcare Scholarship recipient. The scholarship committee was impressed with her involvement in SWE, Engineers without Borders and Delta Phi Epsilon.
The section received the Collegiate Section Achievement Award for establishing the SWE Section Endowed Scholarship.
We were also excited to see Andrea Falasco ’12 (B.S. Mechanical Engineering) and learn about her career path during the panel discussion on working for big versus small companies.

Nine section members attended:

Amanda West, junior (mechanical engineering):
“I enjoyed networking with the other SWE sections in the region. It was great to learn how other students handle their organization and use it to help improve our own.”
Talia Olson, junior (mechanical engineering):
“I enjoyed getting inspired by other women engineers and learning from their experiences. I learned how to brand myself and to own my strength in the workforce.”
Cassandra Borr, second-year (mechanical engineering):
“I found this conference to be very empowering, as we were able to see what other women in the industry have accomplished and how they achieved it.”
Carissa Best, first-year (mechanical engineering):
“I really enjoyed having the opportunity to hear the stories of confident women in STEM who were interested in empowering other women.”
Kathryn Krieger, second-year (environmental engineering):
“SWE has grown to be such an important part of my college career. I am constantly inspired by the women around me and grateful for the opportunities for both personal and professional growth.”
Catherine Huston, second-year (materials science and engineering):
“Learning to own who I am and how to recognize my accomplishments was empowering and an experience I will carry with me as I navigate my path in life.”
Tory Cantrell, first-year (mechanical engineering):
“The most important piece of advice that I will take away from this conference is how it is important to step outside of your comfort zone and evolve your leadership brand as you grow.”
Rixlie Fozilova, graduate student (environmental engineering):
“The Spring Forward SWE conference provided me with an amazing opportunity to network with fellow engineering students and professionals from a wide variety of companies and backgrounds.”
Lydia Minzey, first-year (environmental engineering):
“The conference empowered participants to believe in their abilities and reach out to achieve their full potential, even while being a minority in their field. I’m very grateful to have been able to attend and learn from the wise women present.”

SWE thanks the College of Engineering and engineering departments for supporting SWE throughout the year. We also thank the Undergraduate Student Government and our corporate sponsors, whose support made this travel possible.

By Gretchen Hein, Advisor, Society of Women Engineers.

Design Expo 2023: Awards Results!

Published April 21, 2023

By

Michigan Tech’s Design Expo 2023 was a huge success. Many thanks to our hardworking students—and the faculty advisors who generously and richly support them.

Hundreds of Michigan Tech students presented their innovative work last week at Michigan Tech’s 23rd annual Design Expo. Each project entails hands-on, experiential, discovery-based learning. Teams competed for cash awards totaling nearly $4,000.

“Design Expo gives students an opportunity to showcase their creativity and innovation,” says Nagesh Hatti, who oversees Enterprise.

“The students,” adds Leonard Bohmann, associate dean of the College of Engineering, “create new things, solve global problems and make lives better.”

Many of the Senior Design and Enterprise projects on display at Design Expo are supported by external industry sponsors, allowing students to gain valuable experience through direct exposure to real industrial problems.

In Senior Design, students explore and solve real industry challenges throughout their senior year—from ideation to realization. In the Enterprise Program, teams of first- through fourth-year students from a variety of disciplines operate much like real companies to develop products, services and solutions.

Project Sponsors Support Michigan Tech’s Educational Mission

“Project sponsors generously support our educational mission by providing invaluable project experiences, along with guidance and mentorship for our students,” adds Hatti. “Industry and academia working together as partners in higher education give our students a tremendous learning experience.”

Design Expo’s industry event sponsors make Design Expo, a large campus event, possible. “Their generous support often continues year after year,” says Hatti.

Thompson Surgical Instruments is Design Expo’s 2023 executive partner. ITC Holdings is the event’s directing partner for the 12th consecutive year, joined by fellow directing partner Aramco. And Plexus, OHM Advisors, Altec Inc. and Husky Innovate are collaborating partners.

This year, more than 100 student teams competed for awards. A panel of judges, made up of corporate representatives, community members, and Michigan Tech staff and faculty members, critiqued the projects. “Our esteemed judges give their time and talent to help make Design Expo a success,” adds Hatti.

The judges’ scoring was used to arrive at the awards. Visit the Design Expo website awards page to see the full list of award winning teams (and project videos, too).

The College of Engineering and the Enterprise Program are pleased to announce award winners, below. Congratulations and thanks to ALL teams for a very successful 2023 Design Expo!

ENTERPRISE

FIRST PLACE

123: Velovations

Led by: Ethan McKenzie and Michael Balentine, Mechanical Engineering

Advised by: Steve Lehmann, Biomedical Engineering

Sponsored by: Cleveland Cliffs, Tongy Senger Innovations, Milwaukee Tools

SECOND PLACE

106: Aerospace Enterprise

Led by: Seth Quayle, Mechanical Engineering and Kyle Bruursema, Electrical Engineering

Advised by: L. Brad King, Mechanical Engineering-Engineering Mechanics

Sponsored by: Air Force Research Laboratory (AFRL)

THIRD PLACE

104: Supermileage Systems

Led by: Olivia Zinser and Ben Klein, Electrical Engineering

Advised by: Rick Berkey, Manufacturing and Mechanical Engineering Technology

Sponsored by: GM, Aramco Americas, Oshkosh, Milwaukee Tool, A&D Technology – GIK, and Dana

HONORABLE MENTION

117: Innovative Global Solutions

Led by: Cynthia Wurtz, Mechanical Engineering and Riley Dickert, Physics

Advised by: Radheshyam Tewari, Mechanical Engineering-Engineering Mechanics and Nathan Manser, Geological and Mining Engineering

SENIOR DESIGN

FIRST PLACE

233: Social Engineering for High School Students

Team Members: Connor Langdon, Cybersecurity and Kayla Blunt, Computer Network and System Administration

Advised by: Tim Van Wagner and Victoria Walters, Applied Computing

SECOND PLACE

232: Shot Sleeve Re-design for Steel High Pressure Die Casting (HPDC)

Team Members: Ryan Cesario, Henry Summers, Victoria Berger, Caleb Minasian, and Katherine Jarvis, Materials Science and Engineering

Advised by: Paul Sanders and Walter Milligan, Materials Science and Engineering

Design Expo Innovation Awards (Based on Application)

FIRST PLACE

301: AAA [Affordable, Accessible, Authentic] Prosthesis
Advised by: Jon Herlivich, Chemical Engineering

The AAA team won a first place Design Expo Innovation Award. They are part of Michigan Tech’s Consumer Product Manufacturing Enterprise.

SECOND PLACE

203: Implantable Pulse Generator (IPG) and Lead
Advised by: Jingfeng Jiang and Chunxiu (Traci) Yu, Biomedical Engineering

THIRD PLACE

237: Utilizing Motor Oil to Rejuvenate RAP Materials
Advised by: Zhanping You, Civil, Environmental, and Geospatial Engineering

SWE, Engineering Ambassadors Host Engineering Day Events During March 2023

Published March 30, 2023

By

Instrument with electronics circuit board. — Instrument in the Plexus Lab.

The Society of Women Engineers (SWE) section at Michigan Tech and Engineering Ambassadors hosted an Engineering Day at Dollar Bay-Tamarack City Elementary for K-5 students last Friday (March 24).

Kindergarten and first grade students learned about buoyancy by making tinfoil boats and loading them with marbles until they sank. Second and third graders made roller coasters for marbles and explored the concepts of potential and kinetic energy. Fourth and fifth graders learned about photovoltaic cells and that they cannot store energy while making series and parallel circuits. We especially loved the survey comment: “Electricity is cool!” We thank the Dollar Bay-Tamarack City students and teachers for learning with us and we’d love to host another Engineering Day with you.

Last Saturday (March 25), SWE hosted their annual Engineering Day for Girl Scouts. Youth from northern Wisconsin and the Upper Peninsula came to campus to learn about engineering. The Daisies and Brownies made their own paddle boats and paper airplanes with SWE and Concrete Canoe. They loved seeing the concrete canoe in the Dow building and seeing the difference in weights of the canoe concrete and concrete that is used in sidewalks. One Brownie named Amy (third grade) wrote: “I Loved it here. I amy want to come here for colage.”

The Juniors explored electrical and computer engineering (ECE) with SWE members from the ECE department and Blue Marble Security Enterprise. They met the robot, Ned, who sorts LEGO blocks. They visited the Plexus Lab and watched a shamrock circuit board being made. They explored series and parallel circuits using Play-Doh and LEDs. The most exciting parts were the Arduino and FPGA — students connected a three-color LED to an Arduino and then modified the code to change the rate at which the lights cycled. Each youth changed the code for the FPGA such that their name or a word scrolled across the screen. A fourth grade Junior commented, “I loved this! I really want to do this again,” while a fifth grader said, “It was amazing! Thank you!”

SWE members enjoyed working with the Girl Scouts — this is one of our favorite outreach events. The section is already planning for next year’s event.

By Gretchen Hein, Advisor, Society of Women Engineers.

SWE Attends WELocal Detroit Conference 2023

Published February 24, 2023

By

Conference room with stage and tables of attendees.

Five student members of the Society of Women Engineers (SWE) section at Michigan Tech and SWE advisor Gretchen Hein (MMET) attended the WELocal Detroit conference, held Saturday and Sunday (February 18–19).

The attending students were SWE President Aerith Cruz (junior, management information systems), seniors Lukas Pyryt (mechanical engineering) and Kathleen Pakenas (biomedical engineering), and second-year students Kathryn Krieger (environmental engineering) and Ella Merklein (biomedical engineering).

At the conference, Krieger and Merklein gave a presentation titled “SWE Section and Engineering Ambassadors Host K-5 Engineering Days.” Hein participated in a panel discussion titled “Journeys in Academia, The Perks and Challenges” with faculty from Kettering University.

“Attending the WELocal conference and presenting on our outreach programs was an empowering experience,” said Krieger. “It was a great opportunity to showcase the incredible work being done by our section and a reminder that by working together, we can make a meaningful impact on the next generation of engineers.”

“Being my first conference, I very much enjoyed attending the WELocal conference,” said Pyryt. “This was a chance for me to truly become an ally for SWE and learn more ways to support this organization. I am very thankful for all connections I gained at this conference, as well as new information gained in sessions helping push more to become a better engineer in the process.”

The section celebrated with the SWE-Wisconsin Professional Section the achievements of Andrea Falasco ’12 (BS mechanical engineering) who was selected as an Emerging Leader in Technology and Engineering (ELiTE). “It was great seeing my SWE friends again and meeting new ones at the conference,” said Falasco. “I am honored to be chosen for one of the New ELiTE awards and am grateful for those who nominated me. I learned a lot at the conference and hope to bring this insight back to work and home.”

The SWE section at MTU thanks our alumnae, corporate sponsors, and the College of Engineering for their support of our section and travel to conferences.

By Gretchen Hein, Advisor, Society of Women Engineers.

SAE Winter Baja Invitational: Driving Innovation from the Ground Up

Published February 3, 2023

By

Michigan Tech is the home of the Winter Baja Invitational, which recently brought 22 universities and 45 student-built off-road vehicles to campus on January 28, 2023.

Winter Baja is one of the most exciting invitational events in the SAE Collegiate Design Series. It also serves as a frozen dress rehearsal for the official SAE International Baja competitions, which take place each spring and summer in different locations across the country. Student engineers design and build their vehicles from scratch around an SAE-designated engine.

Blizzard Baja, a student-led team, part of Michigan Tech’s award-winning Enterprise program, organizes this event annually—on top of designing and building a new vehicle for entrance into one or more of the national SAE Baja events.

This year, Winter Baja was held on Saturday, January 28, 2023, near the Student Development Complex at Michigan Technological University. It attracted 45 off-road vehicles from 22 universities, which raced around a one-mile snow/ice circuit course.

The day started with the pickled egg slalom race. This event requires drivers to reach the end of the course, hop out of their vehicle and eat a pickled egg. Then a new driver must jump in the vehicle and drive it back to the starting line. Next was the hill climb race, where vehicles drive as high as possible up the snow bank.

Michigan Tech Blizzard Baja Enterprise team hosts the SAE Winter Baja Competition every year, and takes part in the competition, as well.

Finally, the main event—the endurance race—started at 10:30 AM as cars gridded up at the starting line. TV6 News reporter Tristan Hendrick covered the event: Michigan Tech hosted annual Baja race to give students work experience.

University of Iowa’s Iowa Baja came in first, with 55 laps around the course. Results of the endurance race are available here: https://winterbaja.enterprise.mtu.edu/downloads/WinterBaja2023FinalLapResults.pdf

Congratulations to The Iowa Baja, University of Iowa, which took first place in the endurance race, completing 55 laps around the course in 3:39:02.

Virginia Tech’s Baja Valkyrie took second, completing 51 laps in 3:39:27.

The Michigan Tech Blizzard Baja Enterprise team is advised by Kevin Johnson, assistant teach professor in the Department of Manufacturing and Mechanical Engineering Technology, and Steven Ma, professor of practice in the Department of Mechanical Engineering-Engineering Mechanics.

Michigan Tech computer engineering student Rithik Sawant served as this year’s Winter Baja Coordinator. “The 42nd annual Winter Baja Race this year was one of the largest we have ever held,” he said.

“Winter Baja is the ultimate test for your vehicle—we don’t skimp on the difficulty of the track and size of the jumps.”
Rithik Sawant

Michigan Tech’s Baja team has a long history of success in SAE competitions since the 1970s. Students use modern engineering and manufacturing processes to enhance vehicle performance by focusing on reduction of vehicle mass, maximization of drivetrain efficiency, improvement of driver visibility and comfort, and optimization of off-road vehicle handling and maneuverability.

The 2023 SAE Winter Baja Competition events took place around the clock on January 28 at Michigan Tech.

The Winter Baja Invitational pays tribute to the roots of the Baja SAE Collegiate Design Series and began at Michigan Tech in 1981. Michigan Tech professors emeritus Bill Shapton and Larry Evers created the event to provide students with hands-on engineering experience. One of the first baja races led students through beaver dams and sand pits, from the abandoned Keweenaw town of Mandan up to Copper Harbor. It evolved into a global engineering series with annual official SAE collegiate Baja racing events taking place in North America, South Africa, Brazil, and South Korea.

The starting lineup for the endurance race.

MTU Blizzard Baja’s test vehicle, Hornet, competed with a new front suspension system for research and development.

SAE Winter Baja 2023 Event Sponsors

Special thanks to all SAE Winter Baja event sponsors: McLaren Engineering, Milwaukee Tool, TeamTech, Daimler Truck, Kohler, Caterpillar, Pratt Miller, Ford, Professional Fabricating, Extreme Canopy, and locally, Diamond House International, LevelUp, Keweenaw Petroleum Service, Houghton Powersports, Houghton Fire Department, and Superior Search and Rescue.

Winter Baja photography by: Andrew Erickson, Mackenzie Johnson, and Peter LaMantia.

Engineering Ambassadors and SWE Host Engineering Day on MLK Day 2023

Published January 23, 2023

By

On Martin Luther King Jr. Day, the Society of Women Engineers (SWE) and Engineering Ambassadors (EA) hosted an Engineering Day at Barkell Elementary in Hancock, Michigan. Students from SWE, EA, Tau Beta Pi and Circle K “made it a day on, not a day off” through introducing kindergarten through fifth grade students to engineering.

Kindergarten and first grade students learned about buoyancy and stability through designing a constructing a foil boat to hold a load. Second and third grade students learned about potential and kinetic energy as they designed and constructed roller coasters for marbles. The fourth and fifth graders were introduced to series circuits as they constructed a BouncyBot.

We thank the Tech students for volunteering and the Barkell Elementary students for their enthusiasm and willingness to learn.

By Jaclyn Johnson, Mechanical Engineering-Engineering Mechanics and Gretchen Hein, Manufacturing and Mechanical Engineering Technology.

SWE Section Establishes Endowed Scholarship

Published December 12, 2022

By

Congratulations to Michigan Tech’s SWE Section as they announce the creation of a new endowed scholarship!

The Society of Women Engineers (SWE) Section at Michigan Tech is excited to announce the creation of a new endowed scholarship.

“The scholarship is in honor of our alumnae and alumni who have been part of our section since 1976,” says SWE advisor, Associate Teaching Professor Gretchen Hein.

“Eight years ago, in 2014, we hosted the SWE Region H Conference,” Hein explains. “With the funds received from SWE, we began saving with the goal of establishing an endowed scholarship. At long last, we have met our goal and will begin awarding an annual $1,000 endowed scholarship in 2026 to an active SWE section member.”

The new scholarship is in addition to the current section scholarships being awarded annually, notes Hein.

“As the President of SWE at Michigan Tech, I am excited that our section can provide an additional scholarship opportunity for our members,” said Aerith Cruz, a third year Management Information Systems student. “Our mission is threefold: ‘to stimulate women to achieve their full potential in careers as engineers and leaders, expand the image of the engineering profession as a positive force in improving the quality of life, and demonstrate the value of diversity.’ The establishment of our endowed scholarship demonstrates our dedication to support the future of SWE at Michigan Tech.”

Details regarding the scholarship application process will be announced in 2026. The process will mirror SWE’s current scholarship application where students complete a short essay, have a cumulative GPA of 3.0 or higher, and provide a copy of their resume and a letter of recommendation.

Adds Hein: “Members of Michigan Tech’s SWE section greatly appreciate the guidance and assistance received from Jim Desrochers, director for corporate relations at Michigan Tech, and also Michigan Tech SWE advisor Elizabeth Hoy, director of business and program development at Michigan Tech’s Great Lakes Research Center. And we thank the University and our current and alumni members for their support!”

Would you like to support the SWE Endowed Scholarship?

Donations are welcome! Contribute via check or credit card. Visit mtu.edu/givenow for online donations or to find the mail-in form.

Key points:

Gift Type is “Make a one time gift”
Enter your gift amount
Gift Designation: Select “Other” and enter “SWE Endowed Scholarship #5471″

SWE Congratulates Our Graduating Seniors and Scholarship Recipients

The Society of Women Engineers (SWE) Section at Michigan Tech congratulates our graduating seniors: Sophie Stewart and Audrey Levanen (mechanical engineering) and Kiira Hadden (biomedical engineering). We look forward to hearing from them as alumnae!

The section awarded two scholarships to active upper-division students. We are so proud of the accomplishments of Natalie Hodges (dual major: electrical and computer engineering) and Alli Hummel (civil engineering).

We will be awarding two scholarships in the spring to first- and second-year active members and will be posting the application information during the spring semester.

By Gretchen Hein, Advisor, Society of Women Engineers.

SWE Students and Alumnae Host Girl Scouts Events

Published November 22, 2022

By

Two girls construct cranes on a tabletop. — Junior Girl Scouts participate in crane design at Michigan Tech.

Michigan Tech’s Society of Women Engineers (SWE) section and two SWE alumnae hosted two Girl Scouts events for 69 youth Nov. 8 and 10, 2022.

On Nov. 8, Amy (Palmgren) Rokos ’08 (computer engineering) and Pam (Wolting) Seibert ’10 (civil engineering) hosted a Girl Scouts event for K-5 Scouts in Grand Rapids, Michigan, using activities and materials provided by the SWE section. For this event, Rokos and Seibert selected activities developed at Michigan Tech and received instructions on how to do them with youth. Thirty-nine Scouts participated in the event.

Rokos stated: “The event was a success! I think the girls had fun and the leaders really appreciated us putting on the event.”

Seibert commented: “This morning was fantastic! Thanks to the entire MTU team for these ideas and fantastic programs. (The Scouts) were engaged the entire time frame and came out more excited about engineering. Electrical and chemical engineering seem to be the leaders of interest. The ice cream was really simple too, almost easier than my machine at home.“

On Nov. 10, 30 Junior Girl Scouts in northern Wisconsin and the Upper Peninsula participated in a crane design, construct and test activity hosted by the MTU SWE section. This outreach event was unique because the local Girl Scouts came to Michigan Tech and completed the activity in one of the Manufacturing and Mechanical Engineering Technology labs, while the other Scouts completed the event virtually.

We really appreciated hosting the Nov. 10 event in a Tech lab. When the Scouts were constructing their crane, they could look at an engine stand. The stand and crane have many similar parts. Some of the youth observed that the base of the stand was wider at the base and with this design, when the engine was supported by the boom, the stand did not tip over. These concepts were incorporated into their designs. The SWE members enjoyed working with the Girls Scouts and look forward to the Girl Scouts events we have planned for the spring semester.

By Gretchen Hein, SWE Advisor.

Group photo of girls and hosts. — Girl Scouts visit Michigan Tech.

Girls work with soapy materials at a tabletop. — Event hosted in Grand Rapids, Michigan, for K-5 Girl Scouts.

Several girls seated on a carpeted floor and using bags of material. — Girl Scouts engaged in activities in Grand Rapids.

Category: Manufacturing and Mechanical Engineering Technology

MTU Blizzard Baja Team Succeeds at Baja SAE Competition

Thought-provoking, Intriguing and Sweet: Huskies Remember One of their Own

And the winner is…Michael Havens! He won a $1,000 scholarship!

Justin Hannah earned Second Place and a $500 scholarship.

David Watkins earned third place and a $250 scholarship.

According to the Podkul’s, everyone was a winner!

SWE Section Travels to SWE-Wisconsin Professional Day

Design Expo 2023: Awards Results!

Project Sponsors Support Michigan Tech’s Educational Mission

ENTERPRISE

SENIOR DESIGN

Design Expo Innovation Awards (Based on Application)

SWE, Engineering Ambassadors Host Engineering Day Events During March 2023

Related

SWE Attends WELocal Detroit Conference 2023

SAE Winter Baja Invitational: Driving Innovation from the Ground Up

SAE Winter Baja 2023 Event Sponsors

Engineering Ambassadors and SWE Host Engineering Day on MLK Day 2023

SWE Section Establishes Endowed Scholarship

The Society of Women Engineers (SWE) Section at Michigan Tech is excited to announce the creation of a new endowed scholarship.

Would you like to support the SWE Endowed Scholarship?

SWE Congratulates Our Graduating Seniors and Scholarship Recipients

SWE Students and Alumnae Host Girl Scouts Events