Design Expo 2023: Awards Results!

Michigan Tech’s Design Expo 2023 was a huge success. Many thanks to our hardworking students—and the faculty advisors who generously and richly support them.

Hundreds of Michigan Tech students presented their innovative work last week at Michigan Tech’s 23rd annual Design Expo. Each project entails hands-on, experiential, discovery-based learning. Teams competed for cash awards totaling nearly $4,000.

“Design Expo gives students an opportunity to showcase their creativity and innovation,” says Nagesh Hatti, who oversees Enterprise.

“The students,” adds Leonard Bohmann, associate dean of the College of Engineering, “create new things, solve global problems and make lives better.”

Many of the Senior Design and Enterprise projects on display at Design Expo are supported by external industry sponsors, allowing students to gain valuable experience through direct exposure to real industrial problems.

In Senior Design, students explore and solve real industry challenges throughout their senior year—from ideation to realization. In the Enterprise Program, teams of first- through fourth-year students from a variety of disciplines operate much like real companies to develop products, services and solutions. 

Project Sponsors Support Michigan Tech’s Educational Mission

“Project sponsors generously support our educational mission by providing invaluable project experiences, along with guidance and mentorship for our students,” adds Hatti. “Industry and academia working together as partners in higher education give our students a tremendous learning experience.”

Design Expo’s industry event sponsors make Design Expo, a large campus event, possible. “Their generous support often continues year after year,” says Hatti.

Thompson Surgical Instruments is Design Expo’s 2023 executive partner. ITC Holdings is the event’s directing partner for the 12th consecutive year, joined by fellow directing partner Aramco. And Plexus, OHM Advisors, Altec Inc. and Husky Innovate are collaborating partners.

This year, more than 100 student teams competed for awards. A panel of judges, made up of corporate representatives, community members, and Michigan Tech staff and faculty members, critiqued the projects. “Our esteemed judges give their time and talent to help make Design Expo a success,” adds Hatti.

The judges’ scoring was used to arrive at the awards. Visit the Design Expo website awards page to see the full list of award winning teams (and project videos, too).

The College of Engineering and the Enterprise Program are pleased to announce award winners, below. Congratulations and thanks to ALL teams for a very successful 2023 Design Expo!

ENTERPRISE

FIRST PLACE

Velovations, Michigan Tech’s Bicycle Design Enterprise team, took first place in the Enterprise category at the 2023 Design Expo.

123: Velovations

Led by: Ethan McKenzie and Michael Balentine, Mechanical Engineering

Advised by: Steve Lehmann, Biomedical Engineering

Sponsored by: Cleveland Cliffs, Tongy Senger Innovations, Milwaukee Tools


SECOND PLACE

Michigan Tech’s Aerospace Enterprise team took second place in the Enterprise category.

106: Aerospace Enterprise

Led by: Seth Quayle, Mechanical Engineering and Kyle Bruursema, Electrical Engineering

Advised by: L. Brad King, Mechanical Engineering-Engineering Mechanics

Sponsored by: Air Force Research Laboratory (AFRL)


THIRD PLACE

104: Supermileage Systems

Supermileage Systems Enterprise took third place in the Enterprise category.

Led by: Olivia Zinser and Ben Klein, Electrical Engineering

Advised by: Rick Berkey, Manufacturing and Mechanical Engineering Technology

Sponsored by: GM, Aramco Americas, Oshkosh, Milwaukee Tool, A&D Technology – GIK, and Dana


HONORABLE MENTION

117: Innovative Global Solutions

The Innovative Global Solutions Enterprise team earned an Honorable Mention in the Enterprise category.

Led by: Cynthia Wurtz, Mechanical Engineering and Riley Dickert, Physics

Advised by: Radheshyam Tewari, Mechanical Engineering-Engineering Mechanics and Nathan Manser, Geological and Mining Engineering

Sponsored by: Tree Frog Aquagric

SENIOR DESIGN

FIRST PLACE

233: Social Engineering for High School Students

College of Computing students Kayla Blunt and Connor Langdon won first place in the Senior Design Category for their project, Social Engineering for High School Students

Team Members: Connor Langdon, Cybersecurity and Kayla Blunt, Computer Network and System Administration

Advised by: Tim Van Wagner and Victoria Walters, Applied Computing


SECOND PLACE

232: Shot Sleeve Re-design for Steel High Pressure Die Casting (HPDC)

A team of five Materials Science and Engineering students won second place for their senior design project, Hot Sleeve Re-design for Steel High Pressure Die Casting, sponsored by Mercury Marine

Team Members: Ryan Cesario, Henry Summers, Victoria Berger, Caleb Minasian, and Katherine Jarvis, Materials Science and Engineering

Advised by: Paul Sanders and Walter Milligan, Materials Science and Engineering

Sponsored by: Mercury Marine


THIRD PLACE

214: Design of a Method to Characterize the Depletion Mode Medical Device Battery – Phase 2

This team of biomedical engineering students earned third place for their senior design project, which was sponsored by the US Food and Drug Administration’s Center for Devices and Radiological Health: Design of a Method to Characterize the Depletion Mode Medical Device Battery – Phase 2.

Team Members: Cole Hebert, Cameron Karnosky, Kristin King, William Poster, and Kelsey Moyer, Biomedical Engineering

Advised by: Orhan Soykan and Smitha Rao, Biomedical Engineering

Sponsored by: U.S. Food and Drug Administration, Center for Devices and Radiological Health (CDRH)


HONORABLE MENTION

224: Movable Bookshelf Network

This team of ECE students earned an honorable mention in the senior design category for their project, Movable Bookshelf Network.

Team Members: Spencer Crawford and Ryan Briggs, Computer Engineering and Josh Cribben and Emily Fischer, Electrical Engineering

Advised by: Kit Cischke, Department of Electrical and Computer Engineering

Sponsored by: Michigan Tech Van Pelt and Opie Library


HONORABLE MENTION

227: Physiological Sensing Using a Smart Port-a-Cath

This team’s project, Physiological Sensing Using a Smart Port-a-Cath was sponsored by Lifebridge Health. They earned an honorable mention in the senior design category.

Team Members: Marli Hietala, Savannah Page, Etienne Michels, Ali Dabas and Giovanni Diaz, Biomedical Engineering

Advised by: Sean Kirkpatrick, Biomedical Engineering

Sponsored by: LifeBridge Health

HONORABLE MENTION

231: Renewable Energy Powered Portable Plastic Waste Breakdown Machine

This team of ECE and mechanical engineering students earned an honorable mention in the senior design category for their project, Renewable Energy Powered Portable Plastic Waste Breakdown Machine, sponsored by ITC.

Team Members: Aaron Hogue and Hunter Indermuehle, Electrical Engineering, Ruizhi Ma, Computer Engineering and Zarvan Chinoy, Mechanical Engineering

Advised by: John Lukowski, Electrical and Computer Engineering

Sponsored by: ITC Holdings Corp.

HONORABLE MENTION

237: Utilizing Motor Oil to Rejuvenate RAP Materials

This civil engineering team earned an honorable mention for their senior design project, Utilizing Motor Oil to Rejuvenate Recycled Asphalt Pavement (RAP) Materials.

Team Members: Kira Olson, Construction Management, Alli Hummel, Jacob Cleaver, and AJ Clarey, Civil Engineering

Advised by: Zhanping You, Civil, Environmental, and Geospatial Engineering

Sponsored by: Department of Civil, Environmental, and Geospatial Engineering

Design Expo Innovation Awards (Based on Application)

FIRST PLACE

301: AAA [Affordable, Accessible, Authentic] Prosthesis
Advised by: Jon Herlivich, Chemical Engineering

The AAA team won a first place Design Expo Innovation Award. They are part of Michigan Tech’s Consumer Product Manufacturing Enterprise.

SECOND PLACE

The Implantable Pulse Generator (IPG) and Lead team earned a second place in the Design Expo Innovation Award.


203: Implantable Pulse Generator (IPG) and Lead
Advised by: Jingfeng Jiang and Chunxiu (Traci) Yu, Biomedical Engineering

THIRD PLACE

237: Utilizing Motor Oil to Rejuvenate RAP Materials
Advised by: Zhanping You, Civil, Environmental, and Geospatial Engineering