Category: Electrical and Computer Engineering

MTU Engineering Welcomes 18 New Faculty Members

The College is honored to welcome 18 new faculty members this fall. They bring a range of expertise among seven multidisciplinary research areas: Energy and Sustainability, Advanced Manufacturing, Autonomy and Mobility, Engineering Infrastructure, Engineering for Health, Space and Aerospace, and Navigating our Environment.

Department of Civil, Environmental, and Geospatial Engineering

Quang Tran

Dr. Quang Tran joins the faculty as an assistant professor. He comes to Michigan Tech from Harvard Medical School, Harvard affiliated hospitals, and the UIUC Bioacoustics Research Lab, where he dedicated three years to postdoctoral research. Dr. Tran earned a PhD in Civil Engineering at the University of Illinois Urbana-Champaign, an MS in Civil and Environmental Engineering at California State University, Fullerton, and a BS in Industrial and System Engineering at Ho Chi Minh University of Technology, Vietnam. His research focuses on non-invasive ultrasound for material characterization applications in civil engineering and biomedical fields, diagnosing and monitoring the health of infrastructures and humans.

Ishi Keenum

Dr. Ishi Keenum joins the faculty as an assistant professor. She comes to Michigan Tech from the National Institute of Standards and Technology (NIST), where she completed postdoctoral research. She earned a BS in at the University of Michigan, and an MS and PhD at Virginia Tech, all in Environmental Engineering. Keenum serves as the lead of the bioinformatic working group for the International Microbiome and Multi’Omics Standards Alliance (IMMSA). Her research is focused on the dissemination and treatment of antibiotic resistance through wastewater and water systems, and the microbiology of water systems.

Bo Xiao

Dr. Bo Xiao joins the faculty as assistant professor. He comes to Michigan Tech from Hong Kong Polytechnic University, where he worked as a research assistant professor. He earned a BEng in Civil Engineering at Xi’an University of Architecture and Technology in China, an MS from Concordia University in Canada, and a PhD at the University of Alberta, Canada. His research seeks to advance the digital transformation of the construction industry by adopting automated technologies, including artificial intelligence (AI), robotics, and digital twinning, for modular construction, as well as visual monitoring of construction sites.

Mazi Erfani

Dr. Mazi Erfani joins the faculty as an assistant professor. He comes to Michigan Tech from the University of Maryland, College Park, where he earned a PhD in Civil Engineering. He earned a BS in Civil Engineering and MSc, in Construction Engineering and Management at the University of Tehran in Iran. His research interests include data-driven infrastructure management, Smart construction, equity and diversity, risk management, text analytics and natural language processing, and AI modeling.

Kerri Sleeman

Kerri Sleeman joins the faculty as a professor of practice. After working in the automotive and construction industries as an engineer she joined Michigan Tech staff, directing MTU Facilities Management. She earned a BS in Mechanical Engineering and an MS in Engineering, both at Michigan Tech. Sleeman brings strong industry experience to students in the Construction Management Program, and will increase sustainable construction course offerings for students.

John Bean

John Bean joins Michigan Tech as a visiting professor of practice in the Department of Civil, Environmental, and Geospatial Engineering. He earned an MS in Civil and Structural Engineering at the University of Connecticut and a BS in Civil Engineering at the University of New Hampshire. He also earned a graduate certificate in Surveying Engineering at the University of Maine. His focus for teaching includes surveying, mapping and database support to engineering field-based research projects. He has over 40 years of experience in surveying, civil engineering, and GIS, both in teaching and in practice. His work has taken him to Antarctica, the North Slope of Alaska, and the Mojave Desert, among other places.

Jennifer Miller

Jennifer Miller joins the faculty as a professor of practice. She earned a Master’s in Business Administration at Central Michigan University and a BS in Civil Engineering at Michigan Tech. Her teaching interests focus on construction management. She has more than 20 years of construction experience, including working for General Contractors, Specialty Contractors, design firms, and governmental entities including Michigan Department of Transportation.

Department of Electrical and Computer Engineering

Anna Stuhlmacher

Dr. Anna Stuhlmacher joins the faculty as an assistant professor. She comes to Michigan Tech from the University of Michigan. She earned a BS at Boston University and an MS and PhD at the University of Michigan, all in electrical engineering. She interned at the National Renewable Energy Laboratory (NREL), and grew up in the Chicago area. Her research explores optimizing and controlling distributed energy resources (like solar panels, batteries, and electric vehicles) in the power grid to provide flexibility in the transition to more sustainable and reliable energy systems.

Department of Engineering Fundamentals

Gabriel Draughon

Dr. Gabriel Draughon joins the faculty as an assistant teaching professor. He comes to Michigan Tech from the University of Michigan, where he earned an MS and PhD in Civil Engineering (Intelligent Systems). He earned a BS in Biosystems Engineering at the University of Kentucky. His research and teaching interests involve Smart Cities, and how sensing technologies in urban settings help better understand how people move through, interact with, and derive benefits from social infrastructure.

Department of Chemical Engineering

Kaiwu Huang

Dr. Kaiwu Huang comes to Michigan Tech from Virginia Tech, where he worked as a research associate in the Department of Mining and Minerals Engineering. He earned a BS in Mining and Minerals Engineering at China University of Mining and Technology in Beijing, and an MS and PhD in Mining and Minerals Engineering at Virginia Tech. His research focus is on sustainable mining, including mineral processing, mineral flotation, solid/liquid separation, carbon ore beneficiation, rare earth extraction, and copper concentration.

Luis Manzano

Dr. Luis Manzano comes to Michigan Tech from Monterrey, Mexico, where he earned an MS and PhD in Biotechnology at the Instituto Tecnologico y de Estudios Superiores de Monterrey (ITESM). He earned his undergraduate degree in Biotechnology Engineering, Universidad Politécnica de Pachuca. His research focuses on the sustainable purification of PEG-modified proteins/enzymes (PEGylated), used as biopharmaceuticals in the treatment of disease and potentially in the recovery and purification of anticancer, low-molecular weight compounds such as flavonoids.

Department of Manufacturing and Mechanical Engineering Technology

Rachel Store

Rachel Store joins the faculty as an assistant teaching professor. She earned a BS and MS in Mechanical Engineering, both at Michigan Tech. Her research focus is on friction stir processing and Lean and Quality manufacturing. Her teaching and research interests include additive manufacturing, forming processes, and materials manufacturing with friction stir processing.

Department of Material Science and Engineering

Alexandra Glover

Dr. Alexandra Glover joins the faculty as an assistant professor. She comes to Michigan Tech from Los Alamos National Laboratory, where she worked as a research and development engineer with Sigma Division. Glover earned an MS and PhD at the Colorado School of Mines in Metallurgical and Materials Engineering, and a BS in Materials Science and Engineering at Michigan Tech. Her research interests include mechanical behavior of materials, strengthening mechanisms, deformation processing and design for manufacturing, steels, shape memory alloys, and deformation induced phase transformations.

Joshua Mueller

Dr. Joshua Mueller joins the faculty as an assistant professor. He comes to Michigan Tech from the Dynamic-Structure Design and Engineering Group at Los Alamos National Laboratory, where he worked as a research and development engineer. Mueller earned an MS and PhD at the Colorado School of Mines in Metallurgical and Materials Engineering, and a BS in Materials Science and Engineering at University of Wisconsin-Madison. His research interests include physical metallurgy, phase transformations, thermodynamics, and microstructure evolution.

Sriram Vijayan

Dr. Sriram Vijayan joins Michigan Tech as an assistant professor. He earned a PhD in Materials Science and Engineering at the University of Connecticut, a Master’s in Materials Engineering at the Indian Institute of Technology, Madras, and a Bachelors in Materials Engineering at Jawaharlal Nehru Technological University. His research interests include understanding microstructural evolution in materials under complex thermal conditions,
process-structure-property relationships of additively manufactured builds, and materials for nuclear reactor applications.

Department of Mechanical Engineering-Engineering Mechanics

Shawn Brueshaber

Dr. Shawn Brueshaber comes to Michigan Tech from Western Michigan University, where he earned an MS and PhD in Mechanical Engineering. He earned a BS in Aerospace Engineering at Embry-Riddle Aeronautical University in Daytona Beach, Florida. After graduating, he spent several years in industry. His research is focused on the polar atmospheric dynamics of the giant planets—Jupiter, Saturn, Uranus, and Neptune, with a goal of developing a comprehensive theory of weather and climate applicable to all planetary bodies with an atmosphere.

Chad Walber

Dr. Chad Walber joins the faculty as an Associate Teaching Professor. He earned an MS and PhD in Mechanical Engineering at Michigan Tech, and a BS in both Electrical Engineering and Mechanical Engineering, also from Tech. He worked at PCB Piezotronics as a research and development engineer and at Michigan Tech as a visiting professor of practice. His teaching and research focus includes metrology, dynamic systems, noise and vibration, acoustics, and the test and measurement of those quantities, including developing specification and calibration standards for microphones and sound level meters.

Bhisham Sharma

Dr. Bhisham Sharma joins the faculty as an associate professor. He comes to Michigan Tech from Wichita State University, where he worked as an assistant professor in the Department of Aerospace Engineering. He earned an MS and PhD in Aeronautical and Astronautical Engineering at Purdue University, and a BS in Mechanical Engineering at the University of Pune in Pune, India. Sharma was also a post-doctoral research associate and a visiting assistant professor at Purdue. His research involves the overlap of solid mechanics, structural dynamics, acoustics, and advanced manufacturing. He investigates the fundamental mechanics and acoustics of novel engineered material systems such as acoustic metamaterials, phononic structures, architected lattice structures, stochastic foams, and advanced manufacturing.
.

SWE Section Attends SWE WE23 Societal Conference

Conference collage of speaker, expo, and background with Live Without Limits.

The Society of Women Engineers (SWE) section at Michigan Tech had 16 students attend the SWE WE23 Societal Conference in Los Angeles, California, with Gretchen Hein, SWE advisor. The students greatly enjoyed and benefited from the conference sessions. They also met with MTU alumni from L.A. and engaged with several MTU SWE alumnae. They especially enjoyed hearing stories about Tech and how campus has changed.

The SWE WE23 Career Fair is the largest career fair for women in the world. This year, SWE members had 20 interviews and one job offer from participating. Most will hear back on internships and full-time offers in two weeks.

The conference took place over three days, October 26–28, inviting attendees to Live Without Limits.

SWE thanks our corporate sponsors for their generous support, which enabled us to fund 100% of the students’ travel!

  • Grace Moeggenborg, junior (applied ecology and environmental science): “The conference celebrated all women and minorities in the workplace and helped me redefine being a woman in STEM.”
  • Kelsey Jensen, junior (biomedical engineering): “Attending the WE23 conference was such an amazing experience that furthered my career and inspired me to strive for positions in my career that I originally wouldn’t think of going for.”
  • Rixlie Fozilova, second-year master’s student (environmental engineering): “This was my first time at the SWE national conference and I enjoyed every minute of it.”
  • Katherine Baker, junior (chemical engineering): “My favorite part of the conference was attending an exclusive networking event through the SWE Collegiate Leadership Institute, which I’ve participated in for two years.”
  • Skyler Brawley, senior (computer engineering): “I look forward to the conference all year for the amazing lessons I learn at the sessions and the great career opportunities presented at the career fair.”
  • Olivia O’Brien, senior (electrical engineering): “I’ve come out of this conference a more motivated, driven and ambitious engineer!”
  • Kathryn Krieger, junior (environmental engineering): “I hope to carry the knowledge and connections I made this weekend throughout my career.”
  • Aerith Cruz, senior (management information systems): “It’s incredible how the Michigan Tech network extends beyond Houghton.”
  • Victoria Berger, senior (materials science and engineering): “I was able to grow my professional network through the career fair and various networking activities.”
  • Emma Quinn, senior (materials science and engineering): “This conference reaffirmed my love for engineering and allowed me to envision my career path.”
  • Carissa Best, second-year (mechanical engineering), SWE section president-elect: “I am leaving this conference with the knowledge and tools to become an engineer who isn’t afraid to live life without limits!”
  • Tory Cantrell, second-year (mechanical engineering): “Attending the WE23 conference meant so much to me because I was surrounded by so many other women in STEM who all want to strive to be the best they can and help others succeed just as much.”
  • Marisa Mathews, first-year (mechanical engineering): “I attended 12 different informational sessions and learned more about engineering, leadership and industry than I imagined could be possible in two days.”
  • Talia Olson, senior (mechanical engineering): “I was able to attend a multitude of informative sessions, and one that stuck out to me was learning about how companies are trying to bring more neurodivergent individuals in the workforce.”
  • Amanda West, senior (mechanical engineering), SWE section president: “It is incredible that 16 of us were given a chance to network, interview with and learn from these amazing women and leaders.”
  • Maci Dostaler, junior (software engineering): “As I continue to grow as a leader, I will strive to use all the advice given to me — by some very impressive people — to good use.”

By Jaclyn Johnson and Gretchen Hein, Advisors, Society of Women Engineers at Michigan Tech.

Related

SWE Section Attends WE22 Conference

Michigan Tech ARES Team Competes in Tuscaloosa

The Michigan Tech ARES team is ready to roll.

A student engineering team from Michigan Tech is competing this week in the Robotic Mining Challenge, hosted by the University of Alabama in Tuscaloosa. 

Michigan Tech team prepares ARES for competition. Go Huskies!

The event is designed to create solutions to problems faced on moon exploration missions, with 24 university teams from across the nation taking part.

Each team has spent the past year designing and building a robot that uses resources available on the lunar surface. During the competition, robots must autonomously navigate a lunar-simulated arena and excavate lunar soil, or regolith.

Michigan Tech’s robot, ARES, completed a 15 minute practice runs on Wednesday, May 24. ARES stands for Automated Regolith Excavation System. The name was selected after a brainstorm and voting, says Mechanical Engineering-Engineering Assistant Professor Paul van Susante, the team’s faculty advisor.

Ten of the Michigan Tech team’s 28 members are on site. That includes team lead Karson Linders (mechanical engineering and robotics engineering); Brian Geiger (mechanical engineering); Miranda Meyers (electrical engineering); Brenda Wilson (electrical engineering); Christi LeCaptain (mechanical engineering); Tanner Duncan (mechanical engineering); Collin Miller (mechanical engineering); Ian Giles (robotics engineering); Kyle Hintz (mechanical engineering); and Brendan McRoberts (mechanical engineering).

Many of the students are current or former members of MINE, the Multiplanetary INnovation Enterprise at Michigan Tech, which is also advised by Prof. van Susante. Several of the students recently graduated in April.

Michigan Tech’s ARES robot takes part in at test run at the 2023 Robotic Mining Challenge.

Throughout the week, teams will receive one 15-minute practice run and two competition runs. Practice runs will take place May 22-23 with the challenge beginning the afternoon of May 23 and continuing through May 26.

“We were overall pleased with our first competition run,” said van Susante. “Everything worked, but needed tweaking. “We have learned many things that we will improve today and all day tomorrow before our final competition run on Friday.”

Judges of the competition include industry professionals from Caterpillar, the Exolith Lab at the University of Central Florida and NASA’s Solar System Exploration Research Virtual Institute. 

The Robotic Mining Challenge Award ceremony takes place Friday evening. The Michigan Tech team will travel back to Houghton the next day.

This contest is separate from the NASA Lunabotics Competition, hosted at Kennedy Space Center.

Two Michigan Tech Alumni Elected to the National Academy of Engineering

Congratulations to Michigan Tech alumni Dr. Markus J. Buehler ’01 and Dr. Kevin Tomsovic ’82. Both have been elected to the National Academy of Engineering, among the highest international professional distinctions accorded to an engineer.

Dr. Markus Buehler

Dr. Buehler is honored for implementing the use of nanomechanics to model and design fracture-resistant bioinspired materials. He is the Jerry McAfee (1940) Professor in Engineering, in the Department of Civil and Environmental Engineering at Massachusetts Institute of Technology, Cambridge.

Dr. Tomsovic is honored for contributions to power system computational methods and power engineering education. He is Chancellor’s Professor in the Min H. Kao Department of Electrical Engineering and Computer Science at the University of Tennessee, Knoxville.

Dr. Buehler earned his BS equiv. in Process and Chemical Engineering at the University of Stuttgart, his MS in Engineering Mechanics at Michigan Tech, and his PhD in Materials Science (Chemistry) at Max Planck Institute of Metals Research at the University of Stuttgart. He was a postdoctoral scholar in the Division of Chemistry and Chemical Engineering, California Institute of Technology. His research interests include the materials science and mechanics of natural and biological protein materials in the field of materiomics—the holistic study of material systems—and one which he has pioneered. One focus is how protein materials define our body and how they fail catastrophically through fracture, deformation, and disease. His activities in LAMM, his research Laboratory for Atomistic and Molecular Mechanics, include developing a new paradigm that designs materials from the molecular scale, with multi-scale modeling, additive manufacturing, 3D printing, and experimental synthesis.

Dr. Kevin Tomsovic

Dr. Tomsovic earned his BS in Electrical Engineering at Michigan Tech and his MS and PhD in Electrical Engineering at the University of Washington. He also served as the Kyushu Electric Endowed Chair for Advanced Technology for Electrical Energy with Kumamoto University in Japan and was the National Science Foundation program director with the Electrical and Communications Systems Division of the Engineering Directorate. He has held faculty positions at National Cheng Kung University in Taiwan and the Royal Institute of Technology in Sweden. His research interests include intelligent systems and optimization methodologies that can be applied to various power system problems—developing technology for the operation and planning of the modern power grid that can achieve low cost, reliable power with reduced environmental impact. At UT he directs the Center for Ultra-wide-area Resilient Electric Energy Transmission Networks (CURENT), a graduated National Science Foundation and Department of Energy Engineering Research Center.

About NAE

Founded in 1964, the National Academy of Engineering is a private, independent, nonprofit institution that provides engineering leadership in service to the nation. Its mission is to advance the welfare and prosperity of the nation by providing independent advice on matters involving engineering and technology, and by promoting a vibrant engineering profession and public appreciation of engineering.

New members of the NAE will be formally inducted in October 2023 at the NAE’s annual meeting.

Joint ROTC Commissioning Ceremony April 28, 2023

Cadets at the ceremony.

The Air Force and Army ROTC invite you to the Spring 2023 Commissioning Ceremony on Friday (April 28) from 7-9 p.m. at the Rozsa Center.

This semester we have 11 Air Force cadets and five Army cadets commissioning. Those commissioning are from the following programs:

Biological Sciences | Civil Engineering | Computer Science | Cybersecurity | Electrical Engineering | Engineering Fundamentals | Engineering Management | Environmental Engineering | Forestry | Mathematics | Mechanical Engineering | Physics

We will also be streaming the ceremony if you prefer to watch it live on YouTube. The stream will go live 15 minutes prior to the ceremony.

By Air Force and Army ROTC.

Design Expo 2023: Awards Results!

Michigan Tech’s Design Expo 2023 was a huge success. Many thanks to our hardworking students—and the faculty advisors who generously and richly support them.

Hundreds of Michigan Tech students presented their innovative work last week at Michigan Tech’s 23rd annual Design Expo. Each project entails hands-on, experiential, discovery-based learning. Teams competed for cash awards totaling nearly $4,000.

“Design Expo gives students an opportunity to showcase their creativity and innovation,” says Nagesh Hatti, who oversees Enterprise.

“The students,” adds Leonard Bohmann, associate dean of the College of Engineering, “create new things, solve global problems and make lives better.”

Many of the Senior Design and Enterprise projects on display at Design Expo are supported by external industry sponsors, allowing students to gain valuable experience through direct exposure to real industrial problems.

In Senior Design, students explore and solve real industry challenges throughout their senior year—from ideation to realization. In the Enterprise Program, teams of first- through fourth-year students from a variety of disciplines operate much like real companies to develop products, services and solutions. 

Project Sponsors Support Michigan Tech’s Educational Mission

“Project sponsors generously support our educational mission by providing invaluable project experiences, along with guidance and mentorship for our students,” adds Hatti. “Industry and academia working together as partners in higher education give our students a tremendous learning experience.”

Design Expo’s industry event sponsors make Design Expo, a large campus event, possible. “Their generous support often continues year after year,” says Hatti.

Thompson Surgical Instruments is Design Expo’s 2023 executive partner. ITC Holdings is the event’s directing partner for the 12th consecutive year, joined by fellow directing partner Aramco. And Plexus, OHM Advisors, Altec Inc. and Husky Innovate are collaborating partners.

This year, more than 100 student teams competed for awards. A panel of judges, made up of corporate representatives, community members, and Michigan Tech staff and faculty members, critiqued the projects. “Our esteemed judges give their time and talent to help make Design Expo a success,” adds Hatti.

The judges’ scoring was used to arrive at the awards. Visit the Design Expo website awards page to see the full list of award winning teams (and project videos, too).

The College of Engineering and the Enterprise Program are pleased to announce award winners, below. Congratulations and thanks to ALL teams for a very successful 2023 Design Expo!

ENTERPRISE

FIRST PLACE

Velovations, Michigan Tech’s Bicycle Design Enterprise team, took first place in the Enterprise category at the 2023 Design Expo.

123: Velovations

Led by: Ethan McKenzie and Michael Balentine, Mechanical Engineering

Advised by: Steve Lehmann, Biomedical Engineering

Sponsored by: Cleveland Cliffs, Tongy Senger Innovations, Milwaukee Tools


SECOND PLACE

Michigan Tech’s Aerospace Enterprise team took second place in the Enterprise category.

106: Aerospace Enterprise

Led by: Seth Quayle, Mechanical Engineering and Kyle Bruursema, Electrical Engineering

Advised by: L. Brad King, Mechanical Engineering-Engineering Mechanics

Sponsored by: Air Force Research Laboratory (AFRL)


THIRD PLACE

104: Supermileage Systems

Supermileage Systems Enterprise took third place in the Enterprise category.

Led by: Olivia Zinser and Ben Klein, Electrical Engineering

Advised by: Rick Berkey, Manufacturing and Mechanical Engineering Technology

Sponsored by: GM, Aramco Americas, Oshkosh, Milwaukee Tool, A&D Technology – GIK, and Dana


HONORABLE MENTION

117: Innovative Global Solutions

The Innovative Global Solutions Enterprise team earned an Honorable Mention in the Enterprise category.

Led by: Cynthia Wurtz, Mechanical Engineering and Riley Dickert, Physics

Advised by: Radheshyam Tewari, Mechanical Engineering-Engineering Mechanics and Nathan Manser, Geological and Mining Engineering

Sponsored by: Tree Frog Aquagric

SENIOR DESIGN

FIRST PLACE

233: Social Engineering for High School Students

College of Computing students Kayla Blunt and Connor Langdon won first place in the Senior Design Category for their project, Social Engineering for High School Students

Team Members: Connor Langdon, Cybersecurity and Kayla Blunt, Computer Network and System Administration

Advised by: Tim Van Wagner and Victoria Walters, Applied Computing


SECOND PLACE

232: Shot Sleeve Re-design for Steel High Pressure Die Casting (HPDC)

A team of five Materials Science and Engineering students won second place for their senior design project, Hot Sleeve Re-design for Steel High Pressure Die Casting, sponsored by Mercury Marine

Team Members: Ryan Cesario, Henry Summers, Victoria Berger, Caleb Minasian, and Katherine Jarvis, Materials Science and Engineering

Advised by: Paul Sanders and Walter Milligan, Materials Science and Engineering

Sponsored by: Mercury Marine


THIRD PLACE

214: Design of a Method to Characterize the Depletion Mode Medical Device Battery – Phase 2

This team of biomedical engineering students earned third place for their senior design project, which was sponsored by the US Food and Drug Administration’s Center for Devices and Radiological Health: Design of a Method to Characterize the Depletion Mode Medical Device Battery – Phase 2.

Team Members: Cole Hebert, Cameron Karnosky, Kristin King, William Poster, and Kelsey Moyer, Biomedical Engineering

Advised by: Orhan Soykan and Smitha Rao, Biomedical Engineering

Sponsored by: U.S. Food and Drug Administration, Center for Devices and Radiological Health (CDRH)


HONORABLE MENTION

224: Movable Bookshelf Network

This team of ECE students earned an honorable mention in the senior design category for their project, Movable Bookshelf Network.

Team Members: Spencer Crawford and Ryan Briggs, Computer Engineering and Josh Cribben and Emily Fischer, Electrical Engineering

Advised by: Kit Cischke, Department of Electrical and Computer Engineering

Sponsored by: Michigan Tech Van Pelt and Opie Library


HONORABLE MENTION

227: Physiological Sensing Using a Smart Port-a-Cath

This team’s project, Physiological Sensing Using a Smart Port-a-Cath was sponsored by Lifebridge Health. They earned an honorable mention in the senior design category.

Team Members: Marli Hietala, Savannah Page, Etienne Michels, Ali Dabas and Giovanni Diaz, Biomedical Engineering

Advised by: Sean Kirkpatrick, Biomedical Engineering

Sponsored by: LifeBridge Health

HONORABLE MENTION

231: Renewable Energy Powered Portable Plastic Waste Breakdown Machine

This team of ECE and mechanical engineering students earned an honorable mention in the senior design category for their project, Renewable Energy Powered Portable Plastic Waste Breakdown Machine, sponsored by ITC.

Team Members: Aaron Hogue and Hunter Indermuehle, Electrical Engineering, Ruizhi Ma, Computer Engineering and Zarvan Chinoy, Mechanical Engineering

Advised by: John Lukowski, Electrical and Computer Engineering

Sponsored by: ITC Holdings Corp.

HONORABLE MENTION

237: Utilizing Motor Oil to Rejuvenate RAP Materials

This civil engineering team earned an honorable mention for their senior design project, Utilizing Motor Oil to Rejuvenate Recycled Asphalt Pavement (RAP) Materials.

Team Members: Kira Olson, Construction Management, Alli Hummel, Jacob Cleaver, and AJ Clarey, Civil Engineering

Advised by: Zhanping You, Civil, Environmental, and Geospatial Engineering

Sponsored by: Department of Civil, Environmental, and Geospatial Engineering

Design Expo Innovation Awards (Based on Application)

FIRST PLACE

301: AAA [Affordable, Accessible, Authentic] Prosthesis
Advised by: Jon Herlivich, Chemical Engineering

The AAA team won a first place Design Expo Innovation Award. They are part of Michigan Tech’s Consumer Product Manufacturing Enterprise.

SECOND PLACE

The Implantable Pulse Generator (IPG) and Lead team earned a second place in the Design Expo Innovation Award.


203: Implantable Pulse Generator (IPG) and Lead
Advised by: Jingfeng Jiang and Chunxiu (Traci) Yu, Biomedical Engineering

THIRD PLACE

237: Utilizing Motor Oil to Rejuvenate RAP Materials
Advised by: Zhanping You, Civil, Environmental, and Geospatial Engineering

Engineering Students Interviewed About Design Expo 2023

Two students seating outside near the waterfront next to an off-road vehicle.
Mechanical engineering students in the Blizzard Baja Enterprise.

Michigan Technological University opens Design Expo to underclassmen

Briana Tucker and Nagesh Hatti (Enterprise) were quoted by WZMQ 19 News in coverage of Michigan Tech’s 2023 Design Expo, held Tuesday (April 18) at the Van Pelt and Opie Library and Memorial Union Building.

The Michigan Tech Baja Racing Team showcased their new car at the expo as well. This year they’ve been mandated to build a four-wheel car in order to compete and the team says they use the tools from class in every cylinder of their project.

Read more at WZMQ 19 News, by Mitchell Rife.

Michigan Tech University holds 23rd annual Design Expo with wide project variety

Tucker, senior Ryan Peckham (electrical engineering) and first-year engineering student Andrew Brenner were interviewed for a WLUC TV6 broadcast segment, and first-year chemical engineering students Ethan LeGrave, Veronica North, and Bailey Wright were mentioned in the accompanying story.

The Wireless Communications Enterprise (WCE) team showcased several of their projects.

Read more at WLUC TV6, by Colin Jackson.

Feats of innovation

The Daily Mining Gazette also covered Expo, mentioning students Breanna Gorman and Cade Meyer.

Breanna Gorman, president of the Enterprise team and fourth-year electrical engineering major showcased a portable battery pack intended for military backpacks.

Cade Meyer, a fourth-year mechanical engineering student was part of the Velovations Enterprise team. They focus on bicycle design projects.

Read more at the Daily Mining Gazette, by Aidan Reilly.

2023 Student Leadership Award Recipients Announced

Outstanding students, staff and alumni were honored Friday (April 14) during Michigan Tech’s 29th annual Student Leadership Awards Ceremony in the Memorial Union Building Ballroom. Thank you to everyone who joined us in celebrating their achievements!

Congratulations to all of the 2023 winners:

Cayton Scholz
Cayton Scholz

Keynote speaker Jessica L. Thompson ’12 (BS, Biological Sciences) was also recognized as the recipient of the 2023 Outstanding Young Alumni Award.

More information about the awards and the recipients can be found on the Student Leadership Awards webpage. We also invite the campus community to save the date for the 30th annual Student Leadership Awards Ceremony, which will be held April 12, 2024, in the MUB Ballroom.

By Student Leadership and Involvement.

SWE, Engineering Ambassadors Host Engineering Day Events During March 2023

Instrument with electronics circuit board.
Instrument in the Plexus Lab.

The Society of Women Engineers (SWE) section at Michigan Tech and Engineering Ambassadors hosted an Engineering Day at Dollar Bay-Tamarack City Elementary for K-5 students last Friday (March 24).

Kindergarten and first grade students learned about buoyancy by making tinfoil boats and loading them with marbles until they sank. Second and third graders made roller coasters for marbles and explored the concepts of potential and kinetic energy. Fourth and fifth graders learned about photovoltaic cells and that they cannot store energy while making series and parallel circuits. We especially loved the survey comment: “Electricity is cool!” We thank the Dollar Bay-Tamarack City students and teachers for learning with us and we’d love to host another Engineering Day with you.

Last Saturday (March 25), SWE hosted their annual Engineering Day for Girl Scouts. Youth from northern Wisconsin and the Upper Peninsula came to campus to learn about engineering. The Daisies and Brownies made their own paddle boats and paper airplanes with SWE and Concrete Canoe. They loved seeing the concrete canoe in the Dow building and seeing the difference in weights of the canoe concrete and concrete that is used in sidewalks. One Brownie named Amy (third grade) wrote: “I Loved it here. I amy want to come here for colage.”

The Juniors explored electrical and computer engineering (ECE) with SWE members from the ECE department and Blue Marble Security Enterprise. They met the robot, Ned, who sorts LEGO blocks. They visited the Plexus Lab and watched a shamrock circuit board being made. They explored series and parallel circuits using Play-Doh and LEDs. The most exciting parts were the Arduino and FPGA — students connected a three-color LED to an Arduino and then modified the code to change the rate at which the lights cycled. Each youth changed the code for the FPGA such that their name or a word scrolled across the screen. A fourth grade Junior commented, “I loved this! I really want to do this again,” while a fifth grader said, “It was amazing! Thank you!”

SWE members enjoyed working with the Girl Scouts — this is one of our favorite outreach events. The section is already planning for next year’s event.

By Gretchen Hein, Advisor, Society of Women Engineers.

Related

Engineering Ambassadors and SWE Host Engineering Day on MLK Day 2023

Bruce Lee: Bio-Inspired Designs

“This illustration from one of my journal articles helps to show the deactivation of a mussel-mimetic adhesive using applied electricity,” says Dr. Lee.
Bruce Lee, professor of Biomedical Engineering at Michigan Tech

Bruce Lee will share his knowledge on Husky Bites, a free, interactive Zoom webinar on Monday, 3/20 at 6 pm ET. Learn something new in just 30 minutes or so, with time after for Q&A! Get the full scoop and register at mtu.edu/huskybites.

What are you doing for supper this Monday 3/20 at 6 p.m. ET? Grab a bite with Dean Janet Callahan and Bruce Lee, professor of Biomedical Engineering at Michigan Tech.

A smart adhesive doesn’t need to adhere all the time. Prof. Bruce Lee looks to biological sources to develop adhesives that can be turned on and off. During Husky Bites, he’ll talk about his work with these advanced adhesives, and their origin: mussel foot proteins. One of those proteins is DOPA (3,4-dihydroxyphenylalanine). DOPA helps mussels cling to their underwater homes. Lee also uses catechols, synthetic compounds that mimic the wet-but-still-sticky proteins secreted by mussels.

Fatemeh Razaviamri

Joining in will be biomedical engineering PhD student Fatemeh Razaviamri. She’s a member of Dr. Lee’s research group. Her research on moisture-activated antiviral coating based on mussel adhesive chemistry earned First Prize for Oral Presentation at the Michigan Tech 2022 Graduate Research Colloquium.

With a small zap of electricity, Lee and his research team can take an underwater smart glue prototype from sticky to not in seven seconds.

DOPA is an amino acid in mussels that enables them to strongly adhere.

“It’s one thing to do this in the open air and quite another under water,” Lee says.

The technology could help with wound dressings, prosthetic attachments or even making car parts and in other manufacturing. 

“A lot of people have been using catechol to mimic mussels and their adhesive proteins, but applying electricity to deactivate it is new,” Lee adds.

“Applying electricity is convenient. It can be potentially integrated with electronic devices. Detaching a smart glue with electricity could also be automated and could be as simple as pushing a button.” 

Dr. Lee recently found that the adhesive he is developing generates hydrogen peroxide as a byproduct. “Hydrogen peroxide is a mild reactive oxygen species and is a signaling molecule that is critical to normal wound healing process,” he explains. “Hydrogen peroxide is also a natural disinfectant.” Next, he aims to control the release of hydrogen peroxide from his adhesive to promote dermal wound healing in diabetic patients. “This adhesive would have the added benefit in preventing infection.”

Play Supplementary Video 1 9 V video
Preview image for Supplementary Video 1 9 V video

Supplementary Video 1 9 V

Watch the 7-second electrical deactivation of a smart glue in Dr. Lee’s Michigan Tech lab.

Dr. Lee earned his PhD and MS in Biomedical Engineering at Northwestern University. He earned his BS in Chemical Engineering at Cornell University. Prior to joining Michigan Tech, Dr. Lee helped found a start-up company, Nerites Corporation, which aimed at commercializing biomimetic bioadhesive and antifouling technologies. Nerites Corporation was acquired by Kensey Nash Corporation (part of Royal DSM) in 2011.

In 2016, Lee earned a prestigious Young Investigator Program (YIP) award from the Office of Naval Research to explore underwater smart adhesives. In 2019, he received Michigan Tech’s Bhakta Rath Research Award with his PhD student Ameya Narkar.

Prof. Lee, how did you first get into engineering? What sparked your interest?

I am interested in building things. In graduate school I learned to do chemistry. This is what has enabled me to synthesize various types of polymers for designing functional biomaterials and adhesives. Much of my research centers around our ability to synthesize functional adhesives, as well as specialized adhesive polymers that answer specific scientific questions.

Hometown, family?

I was born in Taipei, Taiwan. I currently live in Houghton with my wife and two sons. Both my sons go to the local middle and high school in Houghton.

Any hobbies?

My main hobby in winter is to drive my sons to hockey games and watch them play hockey!

Fatemeh, how did you first get into engineering? What sparked your interest?

I like designing and making things that give me a chance to show my creativity. The fact of being able to design biomaterials to be used for the well-being of mankind sounds interesting and motivating—and it is.

Fatemeh earned First Place for her research at Michigan Tech’s 2022 Graduate Research Colloquium

Hometown, family?

I was born in Sari, Iran. I currently live in Houghton with my husband who is also a PhD student in the Biomedical Engineering department at MTU.

What do you like to do in your spare time?

Swimming, photography, and reading books are my hobbies. I also watch documentaries.

Read more:

Q&A with Bhakta Rath Award Winners Ameya Narkar and Bruce Lee

MTU Engineers Zap and Unstick Underwater Smart Glue

Testing a smart adhesive prototype in Dr. Lee’s Biomaterials Lab at Michigan Tech