Category: News

Seed Grants

COE Seed Grants showing researchers in the lab

The College of Engineering is offering seed funding of up to $50,000 for tackling a research problem that requires an interdisciplinary team to address. We wish to promote new collaborations between researchers with a focus on transdisciplinary initiatives that are aggressively forward-looking.

Stage 1 proposals of one page in length are due October 1 for up to $5,000 in support of travel and logistics.

Stage 2 proposals of five pages or fewer requesting up to $45,000 are due November 1. Stage 2 proposals should include a plan, budget justification, team qualifications, and funding track record.

Contact Leonard Bohmann (ljbohman@mtu.edu) for submissions.

Learn more at the College of Engineering.

North Macomb Students Attend Women in Engineering Program

Women in EngineeringA trio of local students recently had a chance to explore an array of engineering careers through Michigan Technological University’s Women in Engineering program.

The Women in Engineering program is a weeklong look at engineering careers in areas such as mechanical, computer, environmental, electrical, biomedical, civil, geological and materials engineering, school officials said in a news release.

Students accepted into the program received a scholarship that covered room and board, tuition and supplies.

Read more at The Voice, by Emily Pauling.

Study Abroad: Clean, Renewable Energy in Iceland

Zoe Ketola, Systems Engineering undergraduate, studied renewable energy in Iceland this summer.
Zoe Ketola, Systems Engineering undergraduate, studied renewable energy in Iceland this summer.

Zoé Ketola enrolled in the The Green Program, which offers short-term, experiential education about the world’s most pressing issues in sustainable development. Ketola took classes through Reykjavik University School of Energy, and also traveled extensively around Iceland. In Ketola’s group there were about 20 others students, coming from Penn State, University of Michigan, Colorado State, and some Canadian universities, to name a few.

Here at Michigan Tech, Ketola is turning her innovative ideas into a reality with a BSE degree in systems engineeringan engineering degree she can customize to fit her interests. She wants to work on improving and overhauling the US electrical grid—facilitating the transition from traditional to clean energy sources.

Why did you decide to go to Iceland for your study abroad?
Iceland is what fell into my lap. It is considered the world’s renewable energy capital and renewable and clean energy are my passion. I never set out looking to go to Iceland (or anywhere, really) but when the department chair of Engineering Fundamentals, Professor Jon Sticklen, told me about the opportunity I couldn’t think of a better place to learn about what I love. Plus, have you seen pictures of the place? It’s a dream if you like the outdoors.

What was your main project while you were there?
I worked on a project that detailed providing personal solar arrays to impoverished communities within the United States. My group focused on communities in West Virginia and we looked into providing the equipment, doing install, how we would run our company, etc. We did this outside of taking courses on hydropower, geothermal, biofuels, and icelandic culture/history.What did you learn about culture and society in Iceland?
The Icelandic people are very hearty. They are independent and they kind of do their own thing. The most interesting things to me included how independent the children are and just how important keeping their public places clean is. You don’t wear your shoes in homes or the public pools. The pools also have a monitor who makes sure you shower before swimming.

“Iceland changed my life. I know that sounds cliche but I felt like I was losing my fire to make things better. I met people who cared about the same things as me and wanted to save the world. Nothing felt better than that. I can never thank my professor enough for helping me to get there.”

How has studying abroad impacted or changed your outlook?
Well, I’m itching to go back to Iceland and have been since I landed back stateside. I’m now looking more seriously at pursuing a masters dealing with energy, maybe even in Iceland.  Iceland reignited my passion to help the planet and to focus on improving the renewable/clean energy sector.

Through the Green Program, Zoé Ketola studied abroad in Iceland with a strong focus on clean renewable energy
Through the Green Program, Zoé Ketola studied abroad in Iceland with a strong focus on clean renewable energy

What was your most memorable experience?
I hiked a little over 10 miles at Fimmvörðuháls in the Icelandic highlands. When we got to the top of our hike, I couldn’t believe I was there. I was standing in between two glaciers with 20 fantastic people from all over the world and it was so surreal. The world is so big yet we all ended up there together.

Outside of working and studying, what was everyday life like? What did you do for fun?
Mostly spent time outside. I hiked everywhere it feels like, including near the southern coast and in the highlands (where I also camped). We visited hot springs, public pools, mountains, glaciers, and a local hostel where we got to meet a band we had started listening to that morning on the bus. We also visited Iceland’s largest geothermal plant and two hydropower plants, one of which was built in the 1960s.


What are your career goals?

I want to work on improving and overhauling the US electrical grid and facilitating the transition from traditional energy sources to clean energy sources. I don’t know what that means yet because it doesn’t look like anyone is doing exactly what I feel like needs to happen but I’ll figure it out along the way. If I quit every time I wasn’t sure of how to move forward I would never get anything done.

Affordable Fused Filament Fabrication-based 3-D Printing

Additive Manufacturing journal coverJoshua Pearce (MSE/ECE) co-authored the study, “Chemical Compatibility of Fused Filament Fabrication-based 3-D Printed Components with Solutions Commonly Used in Semiconductor Wet Processing,” which was published in Additive Manufacturing.

https://doi.org/10.1016/j.addma.2018.07.015

Extract

3-D printing shows great potential in laboratories for making customized labware and reaction vessels. In addition, affordable fused filament fabrication (FFF)-based 3-D printing has successfully produced high-quality and affordable scientific equipment, focusing on tools without strict chemical compatibility limitations.

The results show that 3-D printed plastics are potential materials for bespoke chemically resistant labware at less than 10% of the cost of such purchased tools.

In Print

ME students Aubrey Woern and DJ Byard coauthored a paper with Joshua Pearce (MSE/ECE) on Fused Particle Fabrication 3-D Printing: Recycled Materials’ Optimization and Mechanical Properties, which was published in Materials.

https://doi.org/10.3390/ma11081413

Narkar and Lee on pH-Responsive, Reversible Adhesion

Ameya Narkar and Bruce Lee (Biomed) published “Incorporation of Anionic Monomer to Tune the Reversible Catechol-Boronate Complex for pH Responsive, Reversible Adhesion,” in Langmuir (ACS Publications).

DOI: 10.1021/acs.langmuir.8b00373

Bruce P. Lee is an associate professor in the Department of Biomedical Engineering. Ameya Narkar is a PhD student in the biomedical engineering program.

Ameya Narkar
Ameya Narkar
Bruce P. Lee
Bruce P. Lee

Engineering Alumni Activity Summer 2018

Michigan Tech alumnus Chris James wrote the article, “How Wind and Hydro Power Plus Energy Storage Are Paving the Way to 100 Percent Renewables in Alaska,” in Renewable Energy World. James, who earned a BS in electrical engineering, is a senior firmware engineer at Maxwell Technologies.

Sean Kelley
Sean Kelley

Civil Engineering alumnus, Sean Kelley, will serve as the 2018-2019 president of the American Council of Engineering Companies (ACEC) of Michigan. He earned a bachelor of science in civil engineering from Michigan Technological University and an MBA from Eastern Michigan University and is a registered professional engineer in Michigan and Ohio. Read the full MITechNews story.

Michigan Tech Alumnus J. R. Richardson, of Ontonagon, was honored by the Upper Peninsula Sportsmen’s Alliance as the 2018 “Outstanding Conservationist.” The story was featured in Michigan Ag Connection. Richardson has served on the Michigan Natural Resources Commission since 2007. A graduate of Michigan Technological University, Richardson holds a bachelor’s degree in chemical engineering and has completed course work toward a business engineering administration degree.

Duane Rondeau
Duane Rondeau

Michigan Tech alumnus Duane Rondeau, has been promoted to executive director of sales – masonry and hardscape at Besser Co. Upon graduating with a Mechanical Engineering degree from Michigan Technological University, Rondeau joined the Besser Engineering team in 1988, later moving into sales administration and ultimately a leadership role in international sales in 2012. The story was covered in Concrete Products.

The U.S. Nuclear Regulatory Commission has selected Michigan Tech alumnus Paul LaFlamme as the new senior resident inspector at the Palisades nuclear power plant in South Haven, Michigan. The story was covered in PublicNow.com. LaFlamme earned a bachelor’s degree in mechanical engineering from Michigan Technological University and a bachelor’s degree in mathematics from the University of Wisconsin.

Michigan Tech alumnus Robert S. Middleton was the subject of the article “Broadway Announces Robert S. Middleton as its Qualified Person.” Broadway Gold Mining Ltd. of Vancouver, British Columbia recently named Middleton at its Qualified Person. The story was covered by several outlets including digitalproducer.com. Bob is a graduate of the Provincial Institute of Mining (Haileybury School of Mines) and Michigan Technological University (BS and MS Applied Geophysics), and he attended the University of Toronto’s PhD program in Geology.

James Morrison
James Morrison

The Deep Foundations Institute (DFI) has named Michigan Tech alumnus, Jim Morrison (CEE) co-chair of the newly formed Tunneling and Underground Systems Committee. Morrison, a vice president of COWI, has more than 35 years of civil engineering experience. His career has covered a broad spectrum of large and complex underground and heavy construction working on bridges, dams, hydroelectric generating plants, highways, deep excavations, transportation and water/sewer tunneling projects. He received both a bachelor of science and a master of science in civil engineering from Michigan Tech. The DFI is an international association of contractors, engineers, manufacturers, suppliers, academics and owners in the deep foundations industry. The membership creates a consensus voice and a common vision for continual improvement in the planning, design and construction of deep foundations and excavations.

Greg Ives
Greg Ives

Michigan Tech alumnus Greg Ives was featured in the story “U.P. native serves as crew chief for Hendrick Motorsports,” on ABC 10. Ives is a native of Bark River. He graduated from Michigan Tech in 2003 with a BS in mechanical engineering. He grew up around the sport. His dad and brother raced, and his family had a mechanic business.

Sponsored Libre Research Agreements to Create Free and Open Source Software and Hardware

Joshua Pearce (MSE/ECE) published, “Sponsored Libre Research Agreements to Create Free and Open Source Software and Hardware” in the journal Inventions. This article has a pre-approved template appendix that will be useful for Michigan Tech faculty doing sponsored research for open source companies and those wishing to save legal resources for Tech and firms with which they collaborate by streamlining negotiations for projects that do not follow a conventional IP approach.

Inventions 2018, 3(3), 44; doi:10.3390/inventions3030044

Agreement for Sponsored Libre Research at Michigan Tech

Open Source Articles Indexed per Year go up by orders of magnitude
Open Source Articles Indexed per Year

Detroit Students Introduced to STEM and Environmental Science Careers

Environmental CareersFifteen high school students from Detroit and southeast Michigan are exploring natural resources and engineering majors and possible careers at Michigan Tech this week. This is the fourth year that the program has been conducted in conjunction with Tech’s Summer Youth Program.

The students are investigating drinking water treatment, autonomous vehicles, drones, forest biomaterials, soils, wildlife and more with Michigan Tech scientists from mechanical engineering and electrical engineering along with experts from the Michigan DNR and U.S. Forest Service.

The program is coordinated by the Michigan Tech Center for Science and Environmental Outreach, with funding from Michigan Tech’s School of Forest Resources and Environmental Science, College of Engineering, Admissions, Housing and Residential Life, Great Lakes Research Center and the Center for Diversity and Inclusion.

By Joan Chadde.

City students learn environmental values during career tour at Tech

HOUGHTON — A group of 13 high school students from Detroit and southeast Michigan spent last week getting a firsthand look at the Copper Country and environmental and engineering programs at Michigan Tech.

Student often come to the program with ideas of careers they are interested in, and many of them aren’t focused on natural resources or ecology, said Lisa Perez from the US Forest Service Urban Connections. However, they typically walk away from the program with new ideas and shifted focus.

Perez and Mike Reed of the Detroit Zoological Society have worked with the students since the program began four years ago.

“It opened their eyes, maybe not to a totally different career path, but it opened their eyes to the fact that they are responsible for the future of the environment,” said Reed.

Read more at the Mining Gazette, by Garrett Neese.

Joshua Pearce on At-home Manufacturing

3D PrintingAn article written by Joshua Pearce (MSE/ECE) for The Conversation, Trade wars will boost digital manufacturing – at consumers’ own homes with personal 3D printers, was picked up by the Associated Press and published widely in several newspapers, including the San Francisco Chronicle, Chicago Tribune, San Antonio Express, Times Union in New York and others. The story was covered on WTOP radio in Washington, D.C. and on TEGNA Broadcast Media (46 television stations covering 50 million people).

Pearce is quoted in an article regarding the Michigan Tech student developed recycling system: Equipment spotlight: Boost for at-home filament extrusion, in Plastics Recycling Update.

In the News

An article written by Joshua Pearce (MSE/ECE) was reprinted by khou.com, the Times UnionFinancial SenseWorld News and several other media outlets.

Joshua Pearce (MSE/ECE) was quoted in the article “3D printing news Sliced Siemens, ExOne, Stratasys, Massivit, CELLINK, Formlabs, Star Rapid,” 3dprintingindustry.com.

Pearce was interviewed on National Public Radio (NPR) for “3D Printing is Turning the Economics of Scale on its Head.” You can listen to the interview here.

Pearce writing on the trade wars and 3D printing was covered by Salon.

DENSO STEM Grant for Michigan Tech

DENSO sign outside the facilityMichigan Tech was listed among the 25 institutions of higher learning that shared in nearly $1 million in funding from DENSO International America, Inc.

DENSO Awards $1 Million in STEM Grants to 25 North American Colleges

DENSO, one of the world’s largest automotive suppliers of technology and components, announced that its philanthropic arm will donate nearly $1 million in overall funding to 25 institutions of higher learning across North America to support science, technology, engineering and math (STEM) educational programming.

“Manufacturing and automotive companies need technically-minded associates now more than ever,” said David Cole, DENSO North American Foundation board member.

Read more at Fleet News Daily.